Latest Products
-
The KICKER KM 10-inch Marine Subwoofer makes waves of its own in a sealed or ported enclosure. Made to take the power and the weather, this sub is custom made to bang in your boat. Completely weather-resistant, these marine subs are real-world tested for salt/fog and UV exposure, meeting or exceeding ASTM standards for marine durability. A completely sealed motor structure and locking/sealed terminal cover make it splash-proof for long life, while a tough Santoprene surround and marine-grade polypropylene cone pump out the bass, no matter how long or loud the party lasts. Packed with features and made for specifically for marine use, KICKER gives you the deep, loud bass your boat needs. FEATURES Four-Ohm Voice Coil Injection-Molded Polypropylene Cone Co-molded Santoprene Surround UniPlate Back Plate And Pole Piece Thick Tinsel Leads Large Ceramic Magnet Rear Gasketing Included Polymer Basket Resists Corrosion Protective Terminal Cap Stainless Mounting Hardware Included Meets or Exceeds ASTM Standards for UV and Salt/Fog Exposure Specifications Woofer(in,mm) 10, 25 Impedance (OHMS) 4 SVC Peak Power Handling(Watts) 350 Continuous Power Handling(Watts RMS) 175 Sealed Enclosure Volume Min-Max(ft³, L) 1-2.4, 28.3-68 Vented Enclosure Volume Min-Max(ft³, L) 1.25-1.75, 35.4-49.6 Frequency Response(Hz) 30-500 Mounting Depth(in, cm) 5, 12.7 Hole Diameter(in, cm) 9-3/16, 23.2 Outer Diameter(in, cm) 10-11/16, 27.1 What’s in the Box: 1 – 10″ Woofer 1 – Back gasket 8 – Mounting screws 8 – Mounting screw clips 1 – Manual Due to continual developement, product, and specifications are subject to change without notice. Stillwater Designs and it’s agents are not responsible for typographical errors.
-
The 12″ Single 4 Ohm KM Series Subwoofer from Kicker is a marine-grade powerhouse designed to thrive in tough environments without compromising audio performance. With 175 watts RMS (350W peak), an injection-molded polypropylene cone, and a co-molded Santoprene surround, it delivers deep, punchy bass with long-lasting durability. Built to meet or exceed ASTM standards for UV and salt/fog exposure, it’s ideal for boats or outdoor installations. Add optional LED grilles and remote for a custom aesthetic experience.
-
Using Class A/B power, this amp features a variable bass boost with KickEQ™ giving you as much as 6dB of extra bump. A powerful 12dB crossover is also included, letting you quickly tune your system to perfection.
Class A/B
190 Watts of Dynamic Power
Stereo Amplifier with Bridging Capability
Conformal-Coated Circuit Board
Variable 12dB Crossover
KickEQ™ Variable 6dB Bass Boost
REAL MARINE™ ABYC/NMMA-Compliant Power Connections
316L Stainless-Steel Hardware IncludedWant setup help? Go to KICKER U for a free woofer-and-amp configuration app!
This KM-Series amplifier delivers 75 watts into two channels, or 150 watts bridged into one channel. See below for more details. -
This amp features a variable bass boost with KickEQ™, giving you as much as 6dB of extra bump. Powering as many as eight speakers, this amplifier makes your entire boat sound like a floating concert! A powerful 12dB crossover is also included, letting you quickly tune your system to perfection.
Class A/B
500 Watts of Dynamic Power
Four-Channel Amplifier with Bridging Capability
Conformal-Coated Circuit Board
Variable 12dB Crossover
KickEQ™ Variable 6dB Bass Boost
REAL MARINE™ ABYC/NMMA-Compliant Power Connections
316L Stainless-Steel Hardware IncludedWant setup help? Go to KICKER U for a free woofer-and-amp configuration app!
This KM-Series amplifier delivers 90 watts into four channels, or 180 watts bridged into two channels. See below for more details. -
Using a Class-D power plant, this amp features a variable bass boost with KickEQ™, giving you as much as 6dB of extra bump. Powering as many as eight speakers, this amplifier makes your entire boat sound like a floating concert! A powerful 12dB crossover is also included, letting you quickly tune your system to perfection.
Ultra-Efficient Class D Design
725 Watts of Dynamic Power
Four-Channel Amplifier with Bridging Capability
Conformal-Coated Circuit Board
Variable 12dB Crossover
KickEQ™ Variable 6dB Bass Boost
REAL MARINE™ ABYC/NMMA-Compliant Power Connections
316L Stainless-Steel Hardware IncludedWant setup help? Go to KICKER U for a free woofer-and-amp configuration app!
This KM-Series amplifier delivers 150 watts into four channels, or 300 watts bridged into two channels. See below for more details. -
Using a Class-D power plant, this amp features a variable bass boost with KickEQ™, giving you as much as 6dB of extra bump on the Amp 3 channels. Powering as many as 12 speakers, this amplifier makes your entire boat sound like a floating concert! A powerful 12dB crossover is also included, letting you quickly tune your system to perfection.
Ultra-Efficient Class D Design
750 Watts of Dynamic Power
Three Zones of Control
Six-Channel Amplifier with Bridging Capability
Conformal-Coated Circuit Board
Variable 12dB Crossover
KickEQ™ Variable 6dB Bass Boost
REAL MARINE™ ABYC/NMMA-Compliant Power Connections
316L Stainless-Steel Hardware IncludedWant setup help? Go to KICKER U for a free woofer-and-amp configuration app!
This KM-Series amplifier delivers 100 watts into six channels, or 200 watts bridged into three channels. See below for more details. -
Experience the perfect way to get bass on your boat! A mighty Class-D power plant, 12dB crossover and subsonic filter all help you dial in the best sound. Use the remote level control to adjust the bass right from the dash and connect the full-range RCA outputs to expand your system!
Ultra-Efficient Class D Design
1200 Watts of Dynamic Power
Mono Amplifier
Conformal-Coated Circuit Board
KMBLC Remote Level Control Included
Variable 12dB Crossover
KickEQ™ Variable 6dB Bass Boost
Fixed 25Hz Subsonic Filter
RCA Pass Through Output
REAL MARINE™ ABYC/NMMA-Compliant Power Connections
316L Stainless-Steel Hardware Included -
The 10″ Single 2 Ohm KM Series Subwoofer is built for marine environments, offering 175 watts RMS (350 watts peak) power handling with durable, weather-resistant construction. It features an injection-molded polypropylene cone, Santoprene rubber surround, and corrosion-resistant polymer basket. Designed for free-air applications, it requires no enclosure, making it ideal for flexible marine installations. With a frequency response of 30–500 Hz and optional LED grille compatibility, it delivers both performance and visual flair on the water.
-
10″ KM Freeair Series Marine Subwoofer
Peak: 350 watts
RMS: 175 watts
Impedance: 4 Ohm
Sensitivity: 86.24 dB
Frequency Response: 30-500Hz
Injection-Molded Polypropylene Cone
Co-molded Santoprene® Surround
UniPlate™ Back Plate And Pole Piece
Thick Tinsel Leads
Large Ceramic Magnet
Rear Gasketing Included
Polymer Basket Resists Corrosion
Protective Terminal Cap
Stainless Mounting Hardware Included
Meets or Exceeds ASTM Standards for UV and Salt/Fog Exposure
Top-mount depth: 5″ -
Completely weather-resistant, these 10 and 12-inch marine subs are real-world tested for salt/fog and UV exposure, meeting or exceeding ASTM standards for marine durability.
-
Extremely compact footprint
Provides power for two- or four-speaker systems
Up to 300-plus watts of power
Fits under motorcycle fairings
Weather-resistant design
Built-in crossover controls
The KPX300.4 Four-Channel Amplifier is built to power every speaker in your ride. Engineered specifically for motorcycles or space-compromised installs, this weather-resistant amp delivers huge power without getting in your way. Ensuring incredible sonic performance and long speaker life has never been easier with a variable 12dB crossover and independent gains. A wide range of input levels make this amp easy to hook up with virtually any factory or aftermarket radio.
This KPX300.4 Amplifier delivers as much as 75 watts per channel (4 channels driven), or 150 watts into two sets of bridged channels. See below for details. -
Extremely compact footprint
Dedicated subwoofer amplifier
Up to 500-plus watts of power
Fits under motorcycle fairings
Weather-resistant design
Built-in crossover controls
CXARC remote bass control compatible
Make your bike bump without taxing your charging system. The KPX500.1 Subwoofer Amp features a 24dB/octave variable low pass crossover and 24dB/octave variable subsonic filter to protect your subwoofers and precisely craft your sound. A wide range of input levels lets this amp easily hook up to virtually any factory or aftermarket radio on the market. To control your bass on the go, connect the optional CXARC remote.
If you have two mono amps or powered subwoofers, check out the DBRC Remote for controlling both from the same knob.
This KPX500.1 Amplifier delivers as much as 500 watts into one channel. See below for details.
Showing 721–732 of 1557 results