-
All Categories
- Audio - Car Amplifiers
- Audio - Car Speakers
- Audio - Car Stereos
- Audio - Car Subwoofers
- Audio - Car Video
- Lighting - Car Lighting
- Marine - Marine Amplifiers
- Marine - Marine Receivers
- Marine - Marine Speakers
- Marine - Marine Subwoofers
- Motorcycle - Audio
- Security - Remote Starters & Car Alarms
- Security Dash Cams & Backup Cameras
- Wheels - Rims
Latest Products
-
Description: Primus Series 6×9″ coaxial model (pair), built for higher output with efficient voicing; popular for rear decks/doors.
-
Description: Primus Series 6×9″ component system (midwoofers + tweeters + crossovers), designed for stronger front-stage and detail than coaxials.
-
Description: 6.5″ Primus Series component set (separate tweeters), intended for improved imaging and detail vs the 603F coaxials.
-
Description: 6×9″ Primus Series 2-way component system, 3Ω, 80W RMS / 240W peak (each), 3/4″ silk edge-driven dome tweeters, polypropylene “Plus One” cone, ~93 dB sensitivity, 50–20k Hz.
-
Description: 6.5″ Reference Series component system, 3Ω, 90W RMS / 270W peak (each), 3/4″ textile edge-driven dome tweeters, polypropylene cones, ~93 dB sensitivity.
-
Description: 6.5″ Reference Series 2-way coaxial, 3Ω, 60W RMS / 180W peak (each), 1″ textile edge-driven dome tweeter, polypropylene cone, ~93 dB sensitivity.
-
Description: 6×9″ Reference Series component system, 3Ω, 125W RMS / 375W peak (each), 3/4″ textile edge-driven dome tweeters, polypropylene cones, ~93 dB sensitivity.
-
Description: 6×9″ Reference Series coaxial, 3Ω, designed for strong output from factory-style power; sold as a pair.
-
GENERAL FEATURES: Digital receiver with AM/FM tuner with 6.75″ capacitive touch screen display, , fits double-DIN dash openings
-
The JVC KW-Z1000W is a premium 10.1-inch floating digital multimedia receiver designed for modern vehicles. It features a high-definition capacitive touchscreen with a resolution of 1280×720, offering crisp visuals and responsive controls. The unit supports wireless Apple CarPlay and Android Auto, allowing seamless smartphone integration.
-
The JVC KW-Z900W is a 9-inch high-definition floating digital media receiver that brings modern technology to your vehicle’s dashboard. It boasts a capacitive touchscreen with a resolution of 1280×720, ensuring clear and vibrant visuals.
-
Marine Amplifier: The Kenwood KAC-M5001 is a Class-D mono subwoofer amplifier, providing 200 watts RMS into a 4 ohm load or 300 watts into a 2 ohm load, and is designed for the marine environment. The marine amp carries IP66, IP67, and ASTM B117 rating.
CTA-2006 Compliant: CTA-2006 is a system of testing and measurement methods for mobile audio amplifiers. This voluntary standard advocates a uniform method for measuring an amplifier’s RMS power output and signal-to-noise ratio. The criteria for measuring power uses a DC input voltage of 14.4 volts and the RMS power output is measured over a frequency range of 20 Hz to 20 kHz (for full range amplifiers), with 1% or less Total Harmonic Distortion plus noise (THD+N). Signal-to-Noise ratio is measured in weighted absolute decibels (dBA) at a reference of 1 watt into 4 ohms. CTA-2006 standards allow consumers to compare car amplifiers and receivers under the same conditions (apples to apples).
Speaker Level Input: The RCA input jacks can be used for preamp level or speaker level input signals. If connecting the source unit’s speaker wire to the input jacks, a pair of speaker wire to RCA adapters will be required (sold separately). When using a speaker level input signal, it may not be necessary to connect a remote turn-on lead because of the amplifier’s signal sensing function.
Protection Circuits: The amp uses a microprocessor to provide protection against over-heating, shorted speaker wires, low impedance on an output channel, and sending a DC signal to the speaker outputs.
Showing 229–240 of 699 results