Description
JL Audio Bass Package
(2) Two Kicker W3 12″ Subwoofers
and 500w Mono Subwoofer Amplifier
JL Audio Bass Package
JL Audio Bass Package
(2) Two Kicker W3 12″ Subwoofers
and 500w Mono Subwoofer Amplifier
Related products
-
2 Kicker Speakers, 1 Kicker 10″ Sub, 1 BT Controller, 1 Kicker 800w 4ch Amplifier
-
- Rockford Fosgate contact and radio flashing information
- M5-800X4:
- 4-Channel powersports amplifier
- 11″ Power/ground/turn-on & speaker output harness (installed on amp)
- 11″ Input harness (installed on amp)
- Two 14″ RCA-to-Molex input adapters
- Power/ground/turn-on adapter plug
- Two 7.5″ speaker output harnesses
- 3mm Allen key
- TMS65:
- Two 2-way speakers
- 2 Street Glide grilles
- 2 Road Glide grilles
- 2 Tour-Pak grilles
- Installation manual (En/ Fr/ Sp/ Others)
- RFK-HD14M5:
- 1 Amp mounting bracket
- 1 Heatsink
- 34″ T-harness
- 65″ Power/ground harness w/ inline 60A Maxi fuse
- 20″ Amplifier output harness
- 12″ Amp output harnress
- 16″ Fairing harness
- 2 Amp output Y-adapters
- 5 Amp bypass plugs
- Eight 8″ wire-ties
- 4 Threaded post adapters
- Two 16mm bolts
- Four 18mm counter-sunk screws
- Four 10mm counter-sunk screws
- Four 8mm hex-socket screws
- 2 Flange-nuts
- Installation guide
-
- M5-800X4:
- 4-Channel powersports amplifier
- 11″ Power/ground/turn-on & speaker output harness (installed on amp)
- 11″ Input harness (installed on amp)
- Two 14″ RCA-to-Molex input adapters
- Power/ground/turn-on adapter plug
- Two 7.5″ speaker output harnesses
- 3mm Allen key
- Owner’s manual
- Performance certificate
- Contact information
- TMS6RG:
- Two 2-way speakers
- 2 Grilles (installed)
- Six 3/4″ Mounting screws
- Installation manual (En/ Fr/ Sp/ Others)
- RFK-HD9813M5:
- Amp mounting plate/heat sink
- 3 Support brackets
- Power cable assembly with 5′ 8-gauge power/ground wire (in-line fuse holder on power wire with 60A Maxi fuse inserted) and 15″ remote wire
- 10′ Rear cable assembly
- 33″ Front output cable
- 23″ Front input cable
- 35-Pin Plug w/ 22″ rear speaker harness
- Two 4″ amp output Y-adapter harnesses
- Eight 8″ wire-ties
- Two 3/4″ threaded posts
- Eight 10mm counter-sunk screws
- Four 8mm screws
- Instruction manual
-
- TM400X4AD Amplifier:
- 4-Channel moto-marine amplifier
- Power/ground/turn-on plug (installed)
- Two 8″ Speaker output harnesses (bare wire to 4-pin Molex)
- Two 14″ Input harnesses (2 RCA to 4-pin Molex)
- Amplifier Quick Setup
- Certificate of Performance Verification
- TMS69BL9813 Baglid Speakers:
- Two 2-way TMS69 speakers
- 2 Grilles
- 2 Mounting brackets
- 2 Speaker protectors
- 2 Templates
- One 8′ Main harness
- Two 25″ Saddlebag harnesses
- Twenty 1/2″ Screws
- Sixteen 7″ Zip ties
- 10 Adhesive backed zip tie mounts
- 2 Cable clamps
- Installation manual
- 2 Saddlebag load warning stickers
- RFK-HDRK Amp Mounting & Wiring Kit:
- 54″ Amp/Bluetooth wire harness with C1 saddle-bag connector and attached Bluetooth audio module (w/ 3M adhesive backing)
- 4′ Power/ground/speaker harness with inline 40A ATO fuse
- 2 T-Harnesses with 11″ turn-on wire (’98-’13 & 2014+ Road King)
- Amplifier mounting plate (attached 3M adhesive strips on bottom)
- Amplifier top cover
- 2 Drilling templates (’98-’13 & 2014+ Road King)
- 45mm Hole saw (attached 1/4″ drill bit)
- 1/8″ Drill bit
- 1 Wire clamp
- Two 10mm machine screws
- Two 6mm machine screws
- 2 Flat washers
- Twelve 7.5″ wire ties
- Installation instructions
Leave a Reply