Latest Products
-
Rockford Fosgate RFIT-20
CALL FOR PRICE
-
Rockford Fosgate RFIT-16
CALL FOR PRICE
-
Rockford Fosgate RFIT-10
CALL FOR PRICE
Image
Product
Price
-
- M5-1500X5:
- 5-Channel powersports amplifier attached to mounting bracket
- 11″ Power/ground/turn-on & subwoofer output harness (installed)
- 11″ Input harness (installed)
- Amplifier power certificate
- RZR19PXP-FSE:
- Two enclosures loaded with 6.5″ 2-way Color Optix speakers (attached 5″ input/tweeter output harnesses)
- Two 16″ tweeter harnesses with inline crossovers
- 2 Rubber caps
- Dash trim piece
- Torx screwdriver
- RZR19PXP-RCA:
- 30″ Ride Command active noise reduction interface
- PMX-RGB:
- Color Optix Light controller mounted to bracket (attached 1.5′ power/ground/RGB harnesses w/inline 2A ATO fuse)
- M2-TS:
- 2 Tweeters (with attached 12″ speaker wire terminated with proprietary plugs)
- 2 Crossovers
- 2 Front flush mount trim rings
- Two M4x25mm Machine screws
- Eight 1-3/4″ Stainless steel Allen head screws
- Eight 1″ Stainless steel Allen head screws
- Six 3/8″ Stainless steel Allen head screws
- 3mm Allen head bit
- Eight 7″ Zip-ties
- Installation/Operation instructions (En/ Fr/ Sp/ Others)
- M2WL-8HB:
- Two M2 8″ waketower speakers w/stainless steel grilles
- 2 Upper mounting brackets
- 2 Lower mounting brackets
- Four 2.5″ – 3.0″ rubber shims w/mounting hardware (four 2-5/8″ bolts / 4 flat washers / 4 lock washers)
- Four 1.5″ – 2.5″ rubber shims w/mounting hardware (four 1-3/4″ bolts / 4 flat washers / 4 lock washers)
- Two 12″ 6-pin wire harnesses w/Deutsch connectors
- 2 Connection cover-plates
- 4 Plastic grommets
- 1/8″ Hex bit
- T-45 Torx wrench
- Instruction manual
- Rockford Fosgate Contact information card
- RZR19PXP-M2FWE:
- M2D4-10IB 10″ DVC subwoofer with stainless-steel Color Optix grille
- Subwoofer enclosure with attached internal 16″ speaker harness
- Add-on enclosure chamber
- 3 Mounting brackets
- Port plug
- RZR19PXP-K4:
- Pre-configured 15′ wiring harness with 4 AWG Power/ground wires and inline Maxi fuse holder
- Two 10″ foam strips with 3M adhesive backing
- Thirty-two 14″ Wire ties
- Twenty-five 8″ wire ties
- Ten 6″ wire ties with push-fasteners
- Twelve 7″ wire ties with clips
- One rubber grommet
- 1.75″ Hole saw with bit
- Hardware Pack:
- 2 Moto-can terminal covers
- Allen key
- 100A Maxi fuse
- 1 Tube of grease
- Amp mounting clamp with nut and washer
- Nine 7/8″ screws
- Eight 3/4″ screws
- Two 3/4″ Torx screws
- 4 Speed-clips
- Four 1-1/2″ Torx bolts
- Three 25mm Torx bolts
- Six 60mm screws
- 4 Flat-washers
- 2 Lock-washers
- Hex-head bit
-
- MX-1 Marine Media Receiver:
- Marine digital media receiver
- Trim-ring
- Mounting plate
- Mounting bracket
- Wiring harness
- 4 Machine screws
- 4 Hex-nuts
- Operation Manual
- X317-DK Dash Kit:
- Radio housing
- Trim ring
- Rear support plate
- 35″ Speaker harness
- 6′ Wire antenna (Motorola plug on one end / bare-ended wire on other end)
- Two 24mm screws
- Eight 1/2″ screws
- Twelve 8″ wire-ties
- Contact information card
- M0-65B Speakers:
- Two 2-way marine speakers
- Twelve 1-1/4″ Stainless steel Allen head screws
- Two 3mm Allen head bits
- 3.5mm Drill bit
- Instruction manual (Eng/ Fren/ Span/Others)
- Rockford Fosgate contact information
- X317-FSE Speaker Enclosures:
- 2 Unloaded speaker enclosures
- 35″ Left front speaker harness
- 52″ Right front speaker harness
- Five 8″ wire ties
- One 30mm bolt
- 1 Flat washer
- 1 Nut
- 2 Warning decals
- Contact information
-
- PMX-1 Media Receiver:
- Marine digital media receiver
- Trim-ring
- Mounting plate
- Mounting bracket
- Wiring harness
- 4 Machine screws
- 4 Hex-nuts
- Operation Manual
- M0-65B 6.5″ Marine Speakers:
- Two 2-way marine speakers
- Twelve 1-1/4″ Stainless steel Allen head screws
- Two 3mm Allen head bits
- 3.5mm Drill bit
- Instruction manual (English/ French/ Spanish/ German/ Italian)
- Rockford Fosgate contact information
- M0WL-65MB 6.5″ Moto-Can Speakers:
- Two M0 6.5″ Moto-Can speakers w/installed sport grille
- 2 Upper mounting brackets
- 2 Lower mounting brackets
- Four 1.0″ – 1.6″ rubber shims w/mounting hardware (four 1-3/8″ bolts / 4 flat washers / 4 lock washers)
- Four 1.6″ – 2.0″ rubber shims w/mounting hardware (four 1-3/4″ bolts / 4 flat washers / 4 lock washers)
- Two 12″ 6-pin wire harnesses w/Deutsch connectors and integrated rubber seals
- 2 Connection cover-plates
- 4 Plastic grommets
- 1/8″ Hex bit
- T-45 Torx wrench
- Instruction manual
- Contact information card
- X317-DK Dash Kit:
- Radio housing
- Trim ring
- Rear support plate
- 35″ Speaker harness
- 6′ Wire antenna (Motorola plug on one end / bare-ended wire on other end)
- Two 24mm screws
- Eight 1/2″ screws
- Twelve 8″ wire-ties
- Contact information card
- X317-FSE Speaker Enclosures:
- 2 Unloaded speaker enclosures
- 35″ Left front speaker harness
- 52″ Right front speaker harness
- Five 8″ wire ties
- One 30mm bolt
- 1 Flat washer
- 1 Nut
- 2 Warning decals
- Contact information
- MX-RSW16 Rear Speaker Harnesses:
- Two 17.5′ Rear speaker harnesses
- Six 6″ wire-ties w/ push-fastener ends
- Sixteen 7.5″ wire-ties
- Contact information card
-
- PMX-2 Digital Media Receiver:
- Marine digital media receiver
- Trim-ring
- Mounting plate
- Mounting bracket
- Wiring harness
- Backstrap
- 4 Machine screws
- 4 Hex-nuts
- Installation/Operation booklet
- M1-65B 6.5″ Speakers:
- Two 2-way marine speakers
- Two 11″ LED power harnesses with 4-pin Deutsch connectors on one end
- Twelve 1-1/4″ Stainless steel Allen head screws
- Two 3mm Allen head bits
- 3.5mm Drill bit
- Instruction manual (English/ French/ Spanish/ German/ Italian)
- Rockford Fosgate contact information
- M5-800X4 Amplifier:
- 4-Channel powersports amplifier
- 11″ Power/ground/turn-on & speaker output harness (installed on amp)
- 11″ Input harness (installed on amp)
- Two 14″ RCA-to-Molex input adapters
- Power/ground/turn-on adapter plug
- Two 7.5″ speaker output harnesses
- 3mm Allen key
- Owner’s manual
- Performance certificate
- Contact information
- X317-M1FWE 10″ Subwoofer:
- Custom enclosure loaded with one M1D2-10B 10″ subwoofer
- 2 Mounting brackets
- 9.5′ 2-Wire harness
- Fourteen 8″ wire ties
- Four 6.5″ wire ties w/push-fasteners
- Six 12mm hex-socket screws
- Contact information
- PMX-RGB Light Controller:
- PMX-RGB LED Controller w/ attached 17″ LED cables and 17″ power/ground harness (inline 2A ATC fuse)
- 6″ Power/ground harness adapter
- Two 3/4″ machine-screws
- 2 Nuts
- 2 Lock-washers
- Installation manual
- X317-DK Dash Kit:
- Radio housing
- Trim ring
- Rear support plate
- 35″ Speaker harness
- 6′ Wire antenna (Motorola plug on one end / bare-ended wire on other end)
- Two 24mm screws
- Eight 1/2″ screws
- Twelve 8″ wire-ties
- Contact information card
- X317-FSE Speaker Enclosures:
- 2 Unloaded speaker enclosures
- 35″ Left front speaker harness
- 52″ Right front speaker harness
- Five 8″ wire ties
- One 30mm bolt
- 1 Flat washer
- 1 Nut
- 2 Warning decals
- Contact information
- RFX3-K8 Amplifier Wiring Kit:
- 11′ 8 AWG Wiring harness (inline 60A maxi-fuse) w/attached 4′ RCA/speaker harness
- Mounting plate
- 2 Brackets
- Fourteen 8″ Wire ties
- Four 6.5″ wire ties w/push-fasteners
- Four 10mm screws
- 2 Hex nuts
- 1 Flange nut
- Installation instructions
-
- PMX-2 Digital Media Receiver:
- Marine digital media receiver
- Trim-ring
- Mounting plate
- Mounting bracket
- Wiring harness
- Backstrap
- 4 Machine screws
- 4 Hex-nuts
- Installation/Operation booklet
- M1-65B 6.5″ Speakers:
- Two 2-way marine speakers
- Two 11″ LED power harnesses with 4-pin Deutsch connectors on one end
- Twelve 1-1/4″ Stainless steel Allen head screws
- Two 3mm Allen head bits
- 3.5mm Drill bit
- Instruction manual (English/ French/ Spanish/ German/ Italian)
- Rockford Fosgate contact information
- M5-800X4 Amplifier:
- 4-Channel powersports amplifier
- 11″ Power/ground/turn-on & speaker output harness (installed on amp)
- 11″ Input harness (installed on amp)
- Two 14″ RCA-to-Molex input adapters
- Power/ground/turn-on adapter plug
- Two 7.5″ speaker output harnesses
- 3mm Allen key
- Owner’s manual
- Performance certificate
- Contact information
- M1WL-65MB Enclosed Rear Speakers:
- Two M1 6.5″ Moto-Can speakers w/installed sport grille
- 2 Upper mounting brackets
- 2 Lower mounting brackets
- Four 1.0″ – 1.6″ rubber shims w/mounting hardware (four 1-3/8″ bolts / 4 flat washers / 4 lock washers)
- Four 1.6″ – 2.0″ rubber shims w/mounting hardware (four 1-3/4″ bolts / 4 flat washers / 4 lock washers)
- Two 12″ 6-pin wire harnesses w/Deutsch connectors and integrated rubber seals
- 2 Connection cover-plates
- 4 Plastic grommets
- 1/8″ Hex bit
- T-45 Torx wrench
- Instruction manual
- Contact information card
- X317-M1FWE 10″ Subwoofer:
- Custom enclosure loaded with one M1D2-10B 10″ subwoofer
- 2 Mounting brackets
- 9.5′ 2-Wire harness
- Fourteen 8″ wire ties
- Four 6.5″ wire ties w/push-fasteners
- Six 12mm hex-socket screws
- Contact information
- PMX-RGB Light Controller:
- PMX-RGB LED Controller w/ attached 17″ LED cables and 17″ power/ground harness (inline 2A ATC fuse)
- 6″ Power/ground harness adapter
- Two 3/4″ machine-screws
- 2 Nuts
- 2 Lock-washers
- Installation manual
- X317-DK Dash Kit:
- Radio housing
- Trim ring
- Rear support plate
- 35″ Speaker harness
- 6′ Wire antenna (Motorola plug on one end / bare-ended wire on other end)
- Two 24mm screws
- Eight 1/2″ screws
- Twelve 8″ wire-ties
- Contact information card
- X317-FSE Speaker Enclosures:
- 2 Unloaded speaker enclosures
- 35″ Left front speaker harness
- 52″ Right front speaker harness
- Five 8″ wire ties
- One 30mm bolt
- 1 Flat washer
- 1 Nut
- 2 Warning decals
- Contact information
- MX-RSW16 Rear Speaker Harnesses:
- Two 17.5′ Rear speaker harnesses
- Six 6″ wire-ties w/ push-fastener ends
- Sixteen 7.5″ wire-ties
- Contact information card
- RFX3-K8 Amplifier Wiring Kit:
- 11′ 8-AWG Wiring harness (inline 60A maxi-fuse) w/attached 4′ RCA/speaker harness
- Mounting plate
- 2 Brackets
- Fourteen 8″ Wire ties
- Four 6.5″ wire ties w/push-fasteners
- Four 10mm screws
- 2 Hex nuts
- 1 Flange nut
- Installation instructions
-
- PMX-3 Digital Media Receiver:
- Marine digital media receiver
- Trim-ring
- Mounting plate
- Mounting bracket
- Wiring harness
- Backstrap
- 4 Machine screws
- 4 Hex-nuts
- Installation/Operation booklet
- M2-65B 6.5″ Speakers:
- Two 2-way marine speakers
- 2 Centrex plastic grilles (Black)
- 2 Stainless steel grilles
- 2 Grille rings (Black)
- Two 11″ LED power harnesses with 4-pin Deutsch connectors on one end
- Twelve 1-3/4″ Stainless steel Allen head screws
- 3mm Allen head bit
- 3.5mm Drill bit
- Contact information
- M5-1500X5 Amplifier:
- 5-Channel powersports amplifier
- 11″ Power/ground/turn-on & subwoofer output harness (installed on amp)
- 11″ Input harness (installed on amp)
- Three 14″ RCA-to-Molex input adapters
- Power/ground/turn-on adapter plug
- Subwoofer output adapter plug
- Two 7.5″ speaker output harnesses
- 3mm Allen key
- Owner’s manual
- Performance certificate
- Contact information
- M2WL-65MB Enclosed Rear Speakers:
- Two M2 6.5″ Moto-Can speakers w/stainless steel grilles installed
- 2 Black plastic sport grilles
- 2 Upper mounting brackets
- 2 Lower mounting brackets
- Four 1.0″ – 1.6″ rubber shims w/mounting hardware (four 1-3/8″ bolts / 4 flat washers / 4 lock washers)
- Four 1.6″ – 2.0″ rubber shims w/mounting hardware (four 1-3/4″ bolts / 4 flat washers / 4 lock washers)
- Two 12″ 6-pin wire harnesses w/Deutsch connectors and integrated rubber seals
- 2 Connection cover-plates
- 4 Plastic grommets
- 1/8″ Hex bit
- T-45 Torx wrench
- Instruction manual
- Contact information card
- X317-M2FWE 10″ Subwoofer (x2):
- Custom enclosure loaded with one M2D2-10B 10″ subwoofer
- 2 Mounting brackets
- 9.5′ 2-Wire harness
- Fourteen 8″ wire ties
- Four 6.5″ wire ties w/push-fasteners
- Six 12mm hex-socket screws
- Contact information
- PMX-RGB Light Controller:
- PMX-RGB LED Controller w/ attached 17″ LED cables and 17″ power/ground harness (inline 2A ATC fuse)
- 6″ Power/ground harness adapter
- Two 3/4″ machine-screws
- 2 Nuts
- 2 Lock-washers
- Installation manual
- X317-DK Dash Kit:
- Radio housing
- Trim ring
- Rear support plate
- 35″ Speaker harness
- 6′ Wire antenna (Motorola plug on one end / bare-ended wire on other end)
- Two 24mm screws
- Eight 1/2″ screws
- Twelve 8″ wire-ties
- Contact information card
- X317-FSE Speaker Enclosures:
- 2 Unloaded speaker enclosures
- 35″ Left front speaker harness
- 52″ Right front speaker harness
- Five 8″ wire ties
- One 30mm bolt
- 1 Flat washer
- 1 Nut
- 2 Warning decals
- Contact information
- MX-RSW16 Rear Speaker Harnesses:
- Two 17.5′ Rear speaker harnesses
- Six 6″ wire-ties w/ push-fastener ends
- Sixteen 7.5″ wire-ties
- Contact information card
- X317-K4 Amplifier Wiring Kit:
- 11′ 4-AWG Wiring harness (inline 100A maxi-fuse) w/attached 4′ RCA/speaker harness
- Y-Harness
- Mounting plate
- 2 Brackets
- Fourteen 8″ Wire ties
- Four 6.5″ wire ties w/push-fasteners
- Four 10mm screws
- 2 Hex nuts
- 1 Flange nut
- Installation instructions
-
- PMX-3 Digital Media Receiver:
- Marine digital media receiver
- Trim-ring
- Mounting plate
- Mounting bracket
- Wiring harness
- Backstrap
- 4 Machine screws
- 4 Hex-nuts
- Installation/Operation booklet
- M2-65B 6.5″ Speakers:
- Two 2-way marine speakers
- 2 Centrex plastic grilles (Black)
- 2 Stainless steel grilles
- 2 Grille rings (Black)
- Two 11″ LED power harnesses with 4-pin Deutsch connectors on one end
- Twelve 1-3/4″ Stainless steel Allen head screws
- 3mm Allen head bit
- 3.5mm Drill bit
- Contact information
- M5-1500X5 Amplifier:
- 5-Channel powersports amplifier
- 11″ Power/ground/turn-on & subwoofer output harness (installed on amp)
- 11″ Input harness (installed on amp)
- Three 14″ RCA-to-Molex input adapters
- Power/ground/turn-on adapter plug
- Subwoofer output adapter plug
- Two 7.5″ speaker output harnesses
- 3mm Allen key
- Owner’s manual
- Performance certificate
- Contact information
- M2WL-8HB Horn Waketower Speakers:
- Two M2 8″ waketower speakers (black) w/stainless steel grilles
- 2 Plastic sport grilles (black)
- 2 Upper mounting brackets
- 2 Lower mounting brackets
- Four 2.5″ – 3.0″ rubber shims w/mounting hardware (four 2-5/8″ bolts / 4 flat washers / 4 lock washers)
- Four 2.5″ – 3.0″ rubber shims w/mounting hardware (four 1-3/4″ bolts / 4 flat washers / 4 lock washers)
- Two 12″ 6-pin wire harnesses w/Deutsch connectors
- 2 Connection cover-plates
- 4 Plastic grommets
- 1/8″ Hex bit
- T-45 Torx wrench
- Instruction manual
- Contact information card
- X317-M2FWE 10″ Subwoofer (x2):
- Custom enclosure loaded with one M2D2-10B 10″ subwoofer
- 2 Mounting brackets
- 9.5′ 2-Wire harness
- Fourteen 8″ wire ties
- Four 6.5″ wire ties w/push-fasteners
- Six 12mm hex-socket screws
- Contact information
- PMX-RGB Light Controller:
- PMX-RGB LED Controller w/ attached 17″ LED cables and 17″ power/ground harness (inline 2A ATC fuse)
- 6″ Power/ground harness adapter
- Two 3/4″ machine-screws
- 2 Nuts
- 2 Lock-washers
- Installation manual
- X317-DK Dash Kit:
- Radio housing
- Trim ring
- Rear support plate
- 35″ Speaker harness
- 6′ Wire antenna (Motorola plug on one end / bare-ended wire on other end)
- Two 24mm screws
- Eight 1/2″ screws
- Twelve 8″ wire-ties
- Contact information card
- X317-FSE Speaker Enclosures:
- 2 Unloaded speaker enclosures
- 35″ Left front speaker harness
- 52″ Right front speaker harness
- Five 8″ wire ties
- One 30mm bolt
- 1 Flat washer
- 1 Nut
- 2 Warning decals
- Contact information
- MX-RSW16 Rear Speaker Harnesses:
- Two 17.5′ Rear speaker harnesses
- Six 6″ wire-ties w/ push-fastener ends
- Sixteen 7.5″ wire-ties
- Contact information card
- X317-K4 Amplifier Wiring Kit:
- 11′ 4-AWG Wiring harness (inline 100A maxi-fuse) w/attached 4′ RCA/speaker harness
- Y-Harness
- Mounting plate
- 2 Brackets
- Fourteen 8″ Wire ties
- Four 6.5″ wire ties w/push-fasteners
- Four 10mm screws
- 2 Hex nuts
- 1 Flange nut
- Installation instructions
-
- Rockford Fosgate PMX-2:
- Marine digital media receiver
- Trim-ring
- Mounting plate
- Mounting bracket
- Wiring harness
- Backstrap
- 4 Machine screws
- 4 Hex-nuts
- Installation & Operation booklet
- Rockford Fosgate RFYXZ-PMXDK:
- Dash bezel
- Power harness
- PMX-2 harness
- PMX-0 harness (in-line 15A fuse)
- PMX-2 housing
- PMX-0 housing
- Metal bracket
- Rubber grommet
- 8 Hex-head screws
- 4 Hex-nuts
- 4 Bullet-connectors
- Clear plastic drill guide
- Installation & Operation booklet
-
- Rockford Fosgate PMX-2:
- Marine digital media receiver
- Trim-ring
- Mounting plate
- Mounting bracket
- Wiring harness
- Backstrap
- 4 Machine screws
- 4 Hex-nuts
- Installation & Operation booklet
- Rockford Fosgate RFYXZ-PMXDK:
- Dash bezel
- Power harness
- PMX-2 harness
- PMX-0 harness (in-line 15A fuse)
- PMX-2 housing
- PMX-0 housing
- Metal bracket
- Rubber grommet
- 8 Hex-head screws
- 4 Hex-nuts
- 4 Bullet-connectors
- Clear plastic drill guide
- Installation & Operation booklet
- Rockford Fosgate RM1652B:
- Two 2-way marine speakers (with fixed grilles)
- Eight 1-1/4″ Stainless steel Allen head screws
- 3mm Allen head bit
- 8 Speed clips
- Installation & Operation booklet
- Rockford Fosgate RFYXZ-FSE:
- 2 Front lower speaker enclosures
- 2 Speaker wire harnesses
- 2 Bolts
- 2 Nuts
- 2 Self-adhesive foam pads
- 6 Wire-ties
- Installation & Operation booklet
-
- Rockford Fosgate PMX-2:
- Marine digital media receiver
- Trim-ring
- Mounting plate
- Mounting bracket
- Wiring harness
- Backstrap
- 4 Machine screws
- 4 Hex-nuts
- Installation & Operation booklet
- Rockford Fosgate RFYXZ-PMXDK:
- Dash bezel
- Power harness
- PMX-2 harness
- PMX-0 harness (in-line 15A fuse)
- PMX-2 housing
- PMX-0 housing
- Metal bracket
- Rubber grommet
- 8 Hex-head screws
- 4 Hex-nuts
- 4 Bullet-connectors
- Clear plastic drill guide
- Installation & Operation booklet
- Rockford Fosgate T400X4AD:
- Four-channel amplifier
- Two 14″ Input harnesses (4-pin Molex connector to 2 female RCAs)
- Two 8″ Speaker output harness (4-pin Molex connector to bare wire)
- Setup disc CD-ROM
- Amplifier Quick Setup sheet
- Certificate of Performance Verification
- Rockford Fosgate RM1652B:
- Two 2-way marine speakers (with fixed grilles)
- Eight 1-1/4″ Stainless steel Allen head screws
- 3mm Allen head bit
- 8 Speed clips
- Installation & Operation booklet
- Rockford Fosgate RM110D2B:
- 10″ Woofer
- Grille
- 8 Screws
- Installation & Operation booklet
- Rockford Fosgate RFYXZ-FSE:
- 2 Front lower speaker enclosures
- 2 Speaker wire harnesses
- 2 Bolts
- 2 Nuts
- 2 Self-adhesive foam pads
- 6 Wire-ties
- Installation & Operation booklet
- Rockford Fosgate RFYXZ-FWE:
- Front subwoofer enclosure
- Subwoofer harness
- Self-adhesive foam
- Installation & Operation booklet
- Rockford Fosgate RFYXZ-K8:
- Wiring harness (inline 60A Maxi-fuse)
- Mounting plate
- 4 Screws
- 10 Wire-ties
- Installation & Operation booklet
-
- Rockford Fosgate PMX-2:
- Marine digital media receiver
- Trim-ring
- Mounting plate
- Mounting bracket
- Wiring harness
- Backstrap
- 4 Machine screws
- 4 Hex-nuts
- Installation & Operation booklet
- Rockford Fosgate RFYXZ-PMXDK:
- Dash bezel
- Power harness
- PMX-2 harness
- PMX-0 harness (in-line 15A fuse)
- PMX-2 housing
- PMX-0 housing
- Metal bracket
- Rubber grommet
- 8 Hex-head screws
- 4 Hex-nuts
- 4 Bullet-connectors
- Clear plastic drill guide
- Installation & Operation booklet
- Rockford Fosgate T400X4AD:
- Four-channel amplifier
- Two 14″ Input harnesses (4-pin Molex connector to 2 female RCAs)
- Two 8″ Speaker output harness (4-pin Molex connector to bare wire)
- Setup disc CD-ROM
- Amplifier Quick Setup sheet
- Certificate of Performance Verification
- Rockford Fosgate RM1652B:
- Two 2-way marine speakers (with fixed grilles)
- Eight 1-1/4″ Stainless steel Allen head screws
- 3mm Allen head bit
- 8 Speed clips
- Installation & Operation booklet
- Rockford Fosgate RM1652W-MB:
- 2 Wakeboard tower speakers
- 2 Mounting couplers
- Two 16″ Speaker harnesses
- 4 Plastic grommets
- 4 Mounting bolts
- 2 Security bolts (pre-installed)
- 4 Nuts
- 2 Safety lanyards
- 2 Lanyard washers
- Torx wrench
- Installation & Operation Manual
- Rockford Fosgate RM110D2B:
- 10″ Woofer
- Grille
- 8 Screws
- Installation & Operation booklet
- Rockford Fosgate RFYXZ-FSE:
- 2 Front lower speaker enclosures
- 2 Speaker wire harnesses
- 2 Bolts
- 2 Nuts
- 2 Self-adhesive foam pads
- 6 Wire-ties
- Installation & Operation booklet
- Rockford Fosgate RFYXZ-FWE:
- Front subwoofer enclosure
- Subwoofer harness
- Self-adhesive foam
- Installation & Operation booklet
- Rockford Fosgate RFYXZ-K8:
- Wiring harness (inline 60A Maxi-fuse)
- Mounting plate
- 4 Screws
- 10 Wire-ties
- Installation & Operation booklet
- Rockford Fosgate PM-CL2B:
- 2 Mounting clamps
- Rockford Fosgate RFXZ-RSW16:
- 10.5′ Left rear speaker harness
- 10.5 Right rear speaker harness
- 20 Wire-ties
- Installation Instructions
Showing 61–71 of 71 results