Latest Products
-
Rockford Fosgate RFIT-20
CALL FOR PRICE
-
Rockford Fosgate RFIT-16
CALL FOR PRICE
-
Rockford Fosgate RFIT-10
CALL FOR PRICE
Image
Product
Price
-
- PMX-3 Marine Media Receiver:
- Marine digital media receiver
- Trim-ring
- Mounting plate
- Mounting bracket
- Wiring harness
- Backstrap
- 4 Machine screws
- 4 Hex-nuts
- Installation/Operation booklet
- RZR14-DK Radio Mounting Kit:
- Trim-panel
- Metal mounting plate
- Plastic mounting frame
- 2 Outer trim-panels (upper/lower)
- 36″ 12-Pin power/ground/speaker harness
- 6′ Wire antenna (Motorola plug on one end / bare-ended wire on other end)
- 24 Hex-socket screws
- Rockford Fosgate Contact information
- M5-1500X5 Amplifier:
- 5-Channel powersports amplifier
- 11″ Power/ground/turn-on & subwoofer output harness (installed on amp)
- 11″ Input harness (installed on amp)
- Three 14″ RCA-to-Molex input adapters
- Power/ground/turn-on adapter plug
- Subwoofer output adapter plug
- Two 7.5″ speaker output harnesses
- 3mm Allen key
- Owner’s manual
- Performance certificate
- Contact information
- M2WL-65MB Moto-Can Speakers:
- Two M2 6.5″ Moto-Can speakers w/stainless steel grilles installed
- 2 Black plastic sport grilles
- 2 Upper mounting brackets
- 2 Lower mounting brackets
- Four 1.0″ – 1.6″ rubber shims w/mounting hardware (four 1-3/8″ bolts / 4 flat washers / 4 lock washers)
- Four 1.6″ – 2.0″ rubber shims w/mounting hardware (four 1-3/4″ bolts / 4 flat washers / 4 lock washers)
- Two 12″ 6-pin wire harnesses w/Deutsch connectors and integrated rubber seals
- 2 Connection cover-plates
- 4 Plastic grommets
- 1/8″ Hex bit
- T-45 Torx wrench
- Instruction manual
- Contact information card
- M2-65B Speakers:
- Two 6.5″ 2-way marine speakers
- 2 Centrex plastic grilles (Black)
- 2 Stainless steel grilles
- 2 Grille rings (Black)
- Two 11″ LED power harnesses with 4-pin Deutsch connectors on one end
- Twelve 1-3/4″ Stainless steel Allen head screws
- 3mm Allen head bit
- 3.5mm Drill bit
- Instruction manual (English/ French/ Spanish/ German/ Italian)
- M2D4-10IB Subwoofer:
- One 10″ marine subwoofer
- 1 Centrex plastic grille (black)
- 1 Stainless steel grille
- 1 Grille ring (black)
- One 11″ LED power harness with 4-pin Deutsch connector on one end
- Six 2-3/8″ Stainless steel Allen head screws
- 4mm Allen head bit
- 4.5mm Drill bit
- Instruction manual (English/ French/ Spanish/ German/ Italian)
- PMX-RGB Color Optix Light Controller:
- LED Controller w/ attached 17″ LED cables and 17″ power/ground harness (inline 2A ATC fuse)
- 6″ Power/ground harness adapter
- Two 3/4″ machine-screws
- 2 Nuts
- 2 Lock-washers
- Installation manual
- RZR14-FWE Subwoofer Enclosure:
- Sub enclosure w/ attached 28″ internal speaker wire
- 30″ Wiring harness
- Two 1″ screws
- 2 Flat-washers
- Two 1-1/2″ adhesive foam pads
- One 14″ section of bare-ended red wire
- Five 8″ zip-ties
- One 14″ zip-tie
- 1 Port plug
- Rockford Fosgate contact information
- RZR14-FSE Speaker Pods:
- 2 Empty speaker pods w/ attached 38″ wire harness
- 2 Threaded studs
- 4 Mounting screws
- 2 Mounting bolts
- 6 Washers
- Hex-head screwdriver
- Five 8″ zip-ties
- Rockford Fosgate contact information
- RZR14-K4 Amplifier Wiring Kit:
- 9.5′ Power/ground/speaker harness (4 AWG w/ inline fuse-holder and 100A Maxi fuse installed)
- 30″ Front/Rear RCA to Molex harness
- 2 Amplifier mounting plates
- Two 25mm Torx-socket screws (T30)
- One 12mm Torx-socket screw (T30)
- Four 10mm Torx-socket screws (T10)
- Twenty 8″ Wire-ties
- Four 6″ zip-ties w/ push-fastener ends
- Rockford Fosgate contact information
- MX-RSW16 Speaker Harnesses:
- Two 17.5′ Rear speaker harnesses
- Six 6″ wire-ties w/ push-fastener ends
- Sixteen 7.5″ wire-ties
- Contact information card
-
- PMX-3 Marine Media Receiver:
- Marine digital media receiver
- Trim-ring
- Mounting plate
- Mounting bracket
- Wiring harness
- Backstrap
- 4 Machine screws
- 4 Hex-nuts
- Installation/Operation booklet
- RZR14-DK Radio Mounting Kit:
- Trim-panel
- Metal mounting plate
- Plastic mounting frame
- 2 Outer trim-panels (upper/lower)
- 36″ 12-Pin power/ground/speaker harness
- 6′ Wire antenna (Motorola plug on one end / bare-ended wire on other end)
- 24 Hex-socket screws
- Rockford Fosgate Contact information
- M5-1500X5 Amplifier:
- 5-Channel powersports amplifier
- 11″ Power/ground/turn-on & subwoofer output harness (installed on amp)
- 11″ Input harness (installed on amp)
- Three 14″ RCA-to-Molex input adapters
- Power/ground/turn-on adapter plug
- Subwoofer output adapter plug
- Two 7.5″ speaker output harnesses
- 3mm Allen key
- Owner’s manual
- Performance certificate
- Contact information
- M2WL-8HB Wake Tower Speakers:
- Two M2 8″ waketower speakers (black) w/stainless steel grilles
- 2 Plastic sport grilles (black)
- 2 Upper mounting brackets
- 2 Lower mounting brackets
- Four 2.5″ – 3.0″ rubber shims w/mounting hardware (four 2-5/8″ bolts / 4 flat washers / 4 lock washers)
- Four 2.5″ – 3.0″ rubber shims w/mounting hardware (four 1-3/4″ bolts / 4 flat washers / 4 lock washers)
- Two 12″ 6-pin wire harnesses w/Deutsch connectors
- 2 Connection cover-plates
- 4 Plastic grommets
- 1/8″ Hex bit
- T-45 Torx wrench
- Instruction manual
- Contact information card
- M2-65B Speakers:
- Two 6.5″ 2-way marine speakers
- 2 Centrex plastic grilles (Black)
- 2 Stainless steel grilles
- 2 Grille rings (Black)
- Two 11″ LED power harnesses with 4-pin Deutsch connectors on one end
- Twelve 1-3/4″ Stainless steel Allen head screws
- 3mm Allen head bit
- 3.5mm Drill bit
- Instruction manual (English/ French/ Spanish/ German/ Italian)
- M2D4-10IB Subwoofer:
- One 10″ marine subwoofer
- 1 Centrex plastic grille (black)
- 1 Stainless steel grille
- 1 Grille ring (black)
- One 11″ LED power harness with 4-pin Deutsch connector on one end
- Six 2-3/8″ Stainless steel Allen head screws
- 4mm Allen head bit
- 4.5mm Drill bit
- Instruction manual (English/ French/ Spanish/ German/ Italian)
- PMX-RGB Color Optix Light Controller:
- LED Controller w/ attached 17″ LED cables and 17″ power/ground harness (inline 2A ATC fuse)
- 6″ Power/ground harness adapter
- Two 3/4″ machine-screws
- 2 Nuts
- 2 Lock-washers
- Installation manual
- RZR14-FWE Subwoofer Enclosure:
- Sub enclosure w/ attached 28″ internal speaker wire
- 30″ Wiring harness
- Two 1″ screws
- 2 Flat-washers
- Two 1-1/2″ adhesive foam pads
- One 14″ section of bare-ended red wire
- Five 8″ zip-ties
- One 14″ zip-tie
- 1 Port plug
- Rockford Fosgate contact information
- RZR14-FSE Speaker Pods:
- 2 Empty speaker pods w/ attached 38″ wire harness
- 2 Threaded studs
- 4 Mounting screws
- 2 Mounting bolts
- 6 Washers
- Hex-head screwdriver
- Five 8″ zip-ties
- Rockford Fosgate contact information
- RZR14-K4 Amplifier Wiring Kit:
- 9.5′ Power/ground/speaker harness (4 AWG w/ inline fuse-holder and 100A Maxi fuse installed)
- 30″ Front/Rear RCA to Molex harness
- 2 Amplifier mounting plates
- Two 25mm Torx-socket screws (T30)
- One 12mm Torx-socket screw (T30)
- Four 10mm Torx-socket screws (T10)
- Twenty 8″ Wire-ties
- Four 6″ zip-ties w/ push-fastener ends
- Rockford Fosgate contact information
- MX-RSW16 Speaker Harnesses:
- Two 17.5′ Rear speaker harnesses
- Six 6″ wire-ties w/ push-fastener ends
- Sixteen 7.5″ wire-ties
- Contact information card
-
- M5-800X4 Amplifier:
- 4-Channel powersports amplifier
- 11″ Power/ground/turn-on & speaker output harness (installed on amp)
- 11″ Input harness (installed on amp)
- Two 14″ RCA-to-Molex input adapters
- Power/ground/turn-on adapter plug
- Two 7.5″ speaker output harnesses
- 3mm Allen key
- Owner’s manual
- Performance certificate
- Contact information
- M1-65B 6.5″ Speakers:
- Two 2-way marine speakers
- Two 11″ LED power harnesses with 4-pin Deutsch connectors on one end
- Twelve 1-1/4″ Stainless steel Allen head screws
- Two 3mm Allen head bits
- 3.5mm Drill bit
- Instruction manual (English/ French/ Spanish/ German/ Italian)
- Rockford Fosgate contact information
- M1D2-10B Subwoofer:
- One 10″ marine subwoofer
- One 11″ LED power harnesses with 4-pin Deutsch connector on one end
- Six 1-3/4″ Stainless steel Allen head screws
- 4mm Allen head bit
- 4.5mm Drill bit
- Instruction manual (English/ French/ Spanish/ German/ Italian)
- Rockford Fosgate contact information
- PMX-RGB Color Optix Light Controller:
- LED Controller w/ attached 17″ LED cables and 17″ power/ground harness (inline 2A ATC fuse)
- 6″ Power/ground harness adapter
- Two 3/4″ machine-screws
- 2 Nuts
- 2 Lock-washers
- Installation manual
- RZR14-FWE Subwoofer Enclosure:
- Subwoofer enclosure w/ attached 28″ internal speaker wire
- 30″ Wiring harness
- 1 Port plug
- Two 1″ screws
- 2 Flat-washers
- Two 1-1/2″ adhesive foam pads
- One 14″ section of bare-ended red wire
- Five 8″ wire-ties
- One 14″ wire-tie
- Contact information
- RZR14-FSE 6.5″ Enclosures:
- 2 Empty speaker pods w/ attached 38″ wire harness
- 2 Threaded studs
- 4 Mounting screws
- 2 Mounting bolts
- 6 Washers
- Hex-head screwdriver
- Five 8″ wire-ties
- Rockford Fosgate Contact information
- RZR14-K8 Amplifier Wiring Kit:
- 9.5′ Power/ground/speaker harness (inline 60A Maxi fuse)
- Two 30″ RCA-to-Molex harnesses
- 2 Amplifier mounting plates (large & small)
- Two 25mm Torx-socket screws
- One 12mm Torx-socket screw
- Four 10mm Torx-socket screws
- Twenty 8″ Wire-ties
- Four 6″ zip-ties w/ push-fastener ends
- Installation manual
- RFPOL-RC34:
- Polaris Ride Command interface (attached 12″ input and 5″ output harnesses)
- Instructions
-
- M5-800X4 Amplifier:
- 4-Channel powersports amplifier
- 11″ Power/ground/turn-on & speaker output harness (installed on amp)
- 11″ Input harness (installed on amp)
- Two 14″ RCA-to-Molex input adapters
- Power/ground/turn-on adapter plug
- Two 7.5″ speaker output harnesses
- 3mm Allen key
- Owner’s manual
- Performance certificate
- Contact information
- M1-65B 6.5″ Speakers:
- Two 2-way marine speakers
- Two 11″ LED power harnesses with 4-pin Deutsch connectors on one end
- Twelve 1-1/4″ Stainless steel Allen head screws
- Two 3mm Allen head bits
- 3.5mm Drill bit
- Instruction manual (English/ French/ Spanish/ German/ Italian)
- Rockford Fosgate contact information
- M1WL-65MB Moto-Can Speakers:
- Two M1 6.5″ Moto-Can speakers w/installed sport grille
- 2 Upper mounting brackets
- 2 Lower mounting brackets
- Four 1.0″ – 1.6″ rubber shims w/mounting hardware (four 1-3/8″ bolts / 4 flat washers / 4 lock washers)
- Four 1.6″ – 2.0″ rubber shims w/mounting hardware (four 1-3/4″ bolts / 4 flat washers / 4 lock washers)
- Two 12″ 6-pin wire harnesses w/Deutsch connectors and integrated rubber seals
- 2 Connection cover-plates
- 4 Plastic grommets
- 1/8″ Hex bit
- T-45 Torx wrench
- Instruction manual
- Contact information card
- M1D2-10B Subwoofer:
- One 10″ marine subwoofer
- One 11″ LED power harnesses with 4-pin Deutsch connector on one end
- Six 1-3/4″ Stainless steel Allen head screws
- 4mm Allen head bit
- 4.5mm Drill bit
- Instruction manual (English/ French/ Spanish/ German/ Italian)
- Rockford Fosgate contact information
- PMX-RGB Color Optix Light Controller:
- LED Controller w/ attached 17″ LED cables and 17″ power/ground harness (inline 2A ATC fuse)
- 6″ Power/ground harness adapter
- Two 3/4″ machine-screws
- 2 Nuts
- 2 Lock-washers
- Installation manual
- RZR14-FWE Subwoofer Enclosure:
- Subwoofer enclosure w/ attached 28″ internal speaker wire
- 30″ Wiring harness
- 1 Port plug
- Two 1″ screws
- 2 Flat-washers
- Two 1-1/2″ adhesive foam pads
- One 14″ section of bare-ended red wire
- Five 8″ wire-ties
- One 14″ wire-tie
- Contact information
- RZR14-FSE 6.5″ Enclosures:
- 2 Empty speaker pods w/ attached 38″ wire harness
- 2 Threaded studs
- 4 Mounting screws
- 2 Mounting bolts
- 6 Washers
- Hex-head screwdriver
- Five 8″ wire-ties
- Rockford Fosgate Contact information
- MX-RSW16 Speaker Harnesses:
- Two 17.5′ Rear speaker harnesses
- Six 6″ wire-ties w/ push-fastener ends
- Sixteen 7.5″ wire-ties
- Contact information card
- RZR14-K8 Amplifier Wiring Kit:
- 9.5′ Power/ground/speaker harness (inline 60A Maxi fuse)
- Two 30″ RCA-to-Molex harnesses
- 2 Amplifier mounting plates (large & small)
- Two 25mm Torx-socket screws
- One 12mm Torx-socket screw
- Four 10mm Torx-socket screws
- Twenty 8″ Wire-ties
- Four 6″ zip-ties w/ push-fastener ends
- Installation manual
- RFPOL-RC34:
- Polaris Ride Command interface (attached 12″ input and 5″ output harnesses)
- Instructions
-
- M5-1500X5 Amplifier:
- 5-Channel powersports amplifier
- 11″ Power/ground/turn-on & subwoofer output harness (installed on amp)
- 11″ Input harness (installed on amp)
- Three 14″ RCA-to-Molex input adapters
- Power/ground/turn-on adapter plug
- Subwoofer output adapter plug
- Two 7.5″ speaker output harnesses
- 3mm Allen key
- Owner’s manual
- Performance certificate
- Contact information
- M2WL-65MB Moto-Can Speakers:
- Two M2 6.5″ Moto-Can speakers w/stainless steel grilles installed
- 2 Black plastic sport grilles
- 2 Upper mounting brackets
- 2 Lower mounting brackets
- Four 1.0″ – 1.6″ rubber shims w/mounting hardware (four 1-3/8″ bolts / 4 flat washers / 4 lock washers)
- Four 1.6″ – 2.0″ rubber shims w/mounting hardware (four 1-3/4″ bolts / 4 flat washers / 4 lock washers)
- Two 12″ 6-pin wire harnesses w/Deutsch connectors and integrated rubber seals
- 2 Connection cover-plates
- 4 Plastic grommets
- 1/8″ Hex bit
- T-45 Torx wrench
- Instruction manual
- Contact information card
- M2-65B Speakers:
- Two 6.5″ 2-way marine speakers
- 2 Centrex plastic grilles (Black)
- 2 Stainless steel grilles
- 2 Grille rings (Black)
- Two 11″ LED power harnesses with 4-pin Deutsch connectors on one end
- Twelve 1-3/4″ Stainless steel Allen head screws
- 3mm Allen head bit
- 3.5mm Drill bit
- Instruction manual (English/ French/ Spanish/ German/ Italian)
- M2D4-10IB Subwoofer:
- One 10″ marine subwoofer
- 1 Centrex plastic grille (black)
- 1 Stainless steel grille
- 1 Grille ring (black)
- One 11″ LED power harness with 4-pin Deutsch connector on one end
- Six 2-3/8″ Stainless steel Allen head screws
- 4mm Allen head bit
- 4.5mm Drill bit
- Instruction manual (English/ French/ Spanish/ German/ Italian)
- PMX-RGB Color Optix Light Controller:
- LED Controller w/ attached 17″ LED cables and 17″ power/ground harness (inline 2A ATC fuse)
- 6″ Power/ground harness adapter
- Two 3/4″ machine-screws
- 2 Nuts
- 2 Lock-washers
- Installation manual
- RZR14-FWE Subwoofer Enclosure:
- Sub enclosure w/ attached 28″ internal speaker wire
- 30″ Wiring harness
- Two 1″ screws
- 2 Flat-washers
- Two 1-1/2″ adhesive foam pads
- One 14″ section of bare-ended red wire
- Five 8″ zip-ties
- One 14″ zip-tie
- 1 Port plug
- Rockford Fosgate contact information
- RFPOL-RC5:
- Polaris Ride Command interface (attached 12″ input and 5″ output harnesses)
- Instructions
- RZR14-FSE Speaker Pods:
- 2 Empty speaker pods w/ attached 38″ wire harness
- 2 Threaded studs
- 4 Mounting screws
- 2 Mounting bolts
- 6 Washers
- Hex-head screwdriver
- Five 8″ zip-ties
- Rockford Fosgate contact information
- RZR14-K4 Amplifier Wiring Kit:
- 9.5′ Power/ground/speaker harness (4 AWG w/ inline fuse-holder and 100A Maxi fuse installed)
- 30″ Front/Rear RCA to Molex harness
- 2 Amplifier mounting plates
- Two 25mm Torx-socket screws (T30)
- One 12mm Torx-socket screw (T30)
- Four 10mm Torx-socket screws (T10)
- Twenty 8″ Wire-ties
- Four 6″ zip-ties w/ push-fastener ends
- Rockford Fosgate contact information
- MX-RSW16 Speaker Harnesses:
- Two 17.5′ Rear speaker harnesses
- Six 6″ wire-ties w/ push-fastener ends
- Sixteen 7.5″ wire-ties
- Contact information card
-
- M5-1500X5 Amplifier:
- 5-Channel powersports amplifier
- 11″ Power/ground/turn-on & subwoofer output harness (installed on amp)
- 11″ Input harness (installed on amp)
- Three 14″ RCA-to-Molex input adapters
- Power/ground/turn-on adapter plug
- Subwoofer output adapter plug
- Two 7.5″ speaker output harnesses
- 3mm Allen key
- Owner’s manual
- Performance certificate
- Contact information
- M2WL-8HB Wake Tower Speakers:
- Two M2 8″ waketower speakers (black) w/stainless steel grilles
- 2 Plastic sport grilles (black)
- 2 Upper mounting brackets
- 2 Lower mounting brackets
- Four 2.5″ – 3.0″ rubber shims w/mounting hardware (four 2-5/8″ bolts / 4 flat washers / 4 lock washers)
- Four 2.5″ – 3.0″ rubber shims w/mounting hardware (four 1-3/4″ bolts / 4 flat washers / 4 lock washers)
- Two 12″ 6-pin wire harnesses w/Deutsch connectors
- 2 Connection cover-plates
- 4 Plastic grommets
- 1/8″ Hex bit
- T-45 Torx wrench
- Instruction manual
- Contact information card
- M2-65B Speakers:
- Two 6.5″ 2-way marine speakers
- 2 Centrex plastic grilles (Black)
- 2 Stainless steel grilles
- 2 Grille rings (Black)
- Two 11″ LED power harnesses with 4-pin Deutsch connectors on one end
- Twelve 1-3/4″ Stainless steel Allen head screws
- 3mm Allen head bit
- 3.5mm Drill bit
- Instruction manual (English/ French/ Spanish/ German/ Italian)
- M2D4-10IB Subwoofer:
- One 10″ marine subwoofer
- 1 Centrex plastic grille (black)
- 1 Stainless steel grille
- 1 Grille ring (black)
- One 11″ LED power harness with 4-pin Deutsch connector on one end
- Six 2-3/8″ Stainless steel Allen head screws
- 4mm Allen head bit
- 4.5mm Drill bit
- Instruction manual (English/ French/ Spanish/ German/ Italian)
- PMX-RGB Color Optix Light Controller:
- LED Controller w/ attached 17″ LED cables and 17″ power/ground harness (inline 2A ATC fuse)
- 6″ Power/ground harness adapter
- Two 3/4″ machine-screws
- 2 Nuts
- 2 Lock-washers
- Installation manual
- RZR14-FWE Subwoofer Enclosure:
- Sub enclosure w/ attached 28″ internal speaker wire
- 30″ Wiring harness
- Two 1″ screws
- 2 Flat-washers
- Two 1-1/2″ adhesive foam pads
- One 14″ section of bare-ended red wire
- Five 8″ zip-ties
- One 14″ zip-tie
- 1 Port plug
- Rockford Fosgate contact information
- RFPOL-RC5:
- Polaris Ride Command interface (attached 12″ input and 5″ output harnesses)
- Instructions
- RZR14-FSE Speaker Pods:
- 2 Empty speaker pods w/ attached 38″ wire harness
- 2 Threaded studs
- 4 Mounting screws
- 2 Mounting bolts
- 6 Washers
- Hex-head screwdriver
- Five 8″ zip-ties
- Rockford Fosgate contact information
- RZR14-K4 Amplifier Wiring Kit:
- 9.5′ Power/ground/speaker harness (4 AWG w/ inline fuse-holder and 100A Maxi fuse installed)
- 30″ Front/Rear RCA to Molex harness
- 2 Amplifier mounting plates
- Two 25mm Torx-socket screws (T30)
- One 12mm Torx-socket screw (T30)
- Four 10mm Torx-socket screws (T10)
- Twenty 8″ Wire-ties
- Four 6″ zip-ties w/ push-fastener ends
- Rockford Fosgate contact information
- MX-RSW16 Speaker Harnesses:
- Two 17.5′ Rear speaker harnesses
- Six 6″ wire-ties w/ push-fastener ends
- Sixteen 7.5″ wire-ties
- Contact information card
-
- Add-on subwoofer enclosure loaded with one M2D4-10IB 10″ Color-Optix subwoofer (attached 2′ wire harness terminated in a 6-pin Deutsch connector)
- 2 Mounting brackets
- Port plug
- Four 1/2″ screws
- Rockford Fosgate contact information
-
- PMX-2:Marine digital media receiver with attached 5″ wiring harness
- RZR19PXP-DK:
- Dash kit for PMX headunit
- RZR19PXP-FSE:
- Two enclosures loaded with 6.5″ 2-way Color Optix speakers (attached 5″ input/tweeter output harnesses)
- Two 16″ tweeter harnesses with inline crossovers
- 2 Rubber caps
- Dash trim piece
- Torx screwdriver
- M1WL-65MB:
- Two M1 6.5″ Color Optix moto-Can speakers w/installed sport grille
- 2 Upper mounting brackets
- 2 Lower mounting brackets
- Four 1.0″ – 1.6″ rubber shims w/mounting hardware (four 1-3/8″ bolts / 4 flat washers / 4 lock washers)
- Four 1.6″ – 2.0″ rubber shims w/mounting hardware (four 1-3/4″ bolts / 4 flat washers / 4 lock washers)
- T-45 Torx wrench
- M1D4-10B:
- 10″ DVC subwoofer with Color Optix grille
- RZR19PXP-M1FWE:
- Subwoofer enclosure with attached internal 16″ speaker harness
- Add-on enclosure chamber
- 3 Mounting brackets
- Port plug
- M5-1500X5:
- 5-Channel powersports amplifier attached to mounting bracket
- 11″ Power/ground/turn-on & subwoofer output harness (installed)
- 11″ Input harness (installed)
- Amplifier power certificate
- RZR19PXP-K4:
- Pre-configured 15′ wiring harness with 4 AWG Power/ground wires and inline Maxi fuse holder
- Two 10″ foam strips with 3M adhesive backing
- Thirty-two 14″ Wire ties
- Twenty-five 8″ wire ties
- Ten 6″ wire ties with push-fasteners
- Twelve 7″ wire ties with clips
- One rubber grommet
- 1.75″ Hole saw with bit
- PMX-RGB:
- Color Optix Light controller mounted to bracket (attached 1.5′ power/ground/RGB harnesses w/inline 2A ATO fuse)
- Hardware Pack:
- 2 Moto-can terminal covers
- Allen key
- 100A Maxi fuse
- 1 Tube of grease
- Amp mounting clamp with nut and washer
- Nine 7/8″ screws
- Eight 3/4″ screws
- Two 3/4″ Torx screws
- 4 Speed-clips
- Four 1-1/2″ Torx bolts
- Three 25mm Torx bolts
- Six 60mm screws
- Four 1/2″ hex-socket screws
- 4 Flat-washers
- 2 Lock-washers
- Hex-head bit
-
- PMX-3:Marine digital media receiver with attached 5″ wiring harness
- RZR19PXP-DK:
- Dash kit for PMX headunit
- RZR19PXP-FSE:
- Two enclosures loaded with 6.5″ 2-way Color Optix speakers (attached 5″ input/tweeter output harnesses)
- Two 16″ tweeter harnesses with inline crossovers
- 2 Rubber caps
- Dash trim piece
- Torx screwdriver
- M2-TS:
- 2 Tweeters (with attached 12″ speaker wire terminated with proprietary plugs)
- 2 Crossovers
- 2 Front flush mount trim rings
- Two M4x25mm Machine screws
- Eight 1-3/4″ Stainless steel Allen head screws
- Eight 1″ Stainless steel Allen head screws
- Six 3/8″ Stainless steel Allen head screws
- 3mm Allen head bit
- Eight 7″ Zip-ties
- Installation/Operation instructions (En/ Fr/ Sp/ Others)
- M2WL-65MB:
- Two M2 6.5″ Moto-can speakers w/stainless steel grilles
- 2 Upper mounting brackets
- 2 Lower mounting brackets
- Four 2.5″ – 3.0″ rubber shims w/mounting hardware (four 2-5/8″ bolts / 4 flat washers / 4 lock washers)
- Four 1.5″ – 2.5″ rubber shims w/mounting hardware (four 1-3/4″ bolts / 4 flat washers / 4 lock washers)
- Two 12″ 6-pin wire harnesses w/Deutsch connectors
- 2 Connection cover-plates
- 4 Plastic grommets
- 1/8″ Hex bit
- T-45 Torx wrench
- Instruction manual
- Rockford Fosgate Contact information card
- RZR19PXP-M2FWE:
- M2D4-10IB 10″ DVC subwoofer with stainless-steel Color Optix grille
- Subwoofer enclosure with attached internal 16″ speaker harness
- Add-on enclosure chamber
- 3 Mounting brackets
- Port plug
- M5-1500X5:
- 5-Channel powersports amplifier attached to mounting bracket
- 11″ Power/ground/turn-on & subwoofer output harness (installed)
- 11″ Input harness (installed)
- Amplifier power certificate
- RZR19PXP-K4:
- Pre-configured 15′ wiring harness with 4 AWG Power/ground wires and inline Maxi fuse holder
- Two 10″ foam strips with 3M adhesive backing
- Thirty-two 14″ Wire ties
- Twenty-five 8″ wire ties
- Ten 6″ wire ties with push-fasteners
- Twelve 7″ wire ties with clips
- One rubber grommet
- 1.75″ Hole saw with bit
- PMX-RGB:
- Color Optix Light controller mounted to bracket (attached 1.5′ power/ground/RGB harnesses w/inline 2A ATO fuse)
- Hardware Pack:
- 2 Moto-can terminal covers
- Allen key
- 100A Maxi fuse
- 1 Tube of grease
- Amp mounting clamp with nut and washer
- Nine 7/8″ screws
- Eight 3/4″ screws
- Two 3/4″ Torx screws
- 4 Speed-clips
- Four 1-1/2″ Torx bolts
- Three 25mm Torx bolts
- Six 60mm screws
- Four 1/2″ hex-socket screws
- 4 Flat-washers
- 2 Lock-washers
- Hex-head bit
-
- PMX-3:Marine digital media receiver with attached 5″ wiring harness
- RZR19PXP-DK:
- Dash kit for PMX headunit
- RZR19PXP-FSE:
- Two enclosures loaded with 6.5″ 2-way Color Optix speakers (attached 5″ input/tweeter output harnesses)
- Two 16″ tweeter harnesses with inline crossovers
- 2 Rubber caps
- Dash trim piece
- Torx screwdriver
- M2-TS:
- 2 Tweeters (with attached 12″ speaker wire terminated with proprietary plugs)
- 2 Crossovers
- 2 Front flush mount trim rings
- Two M4x25mm Machine screws
- Eight 1-3/4″ Stainless steel Allen head screws
- Eight 1″ Stainless steel Allen head screws
- Six 3/8″ Stainless steel Allen head screws
- 3mm Allen head bit
- Eight 7″ Zip-ties
- Installation/Operation instructions (En/ Fr/ Sp/ Others)
- M2WL-8HB:
- Two M2 8″ waketower speakers w/stainless steel grilles
- 2 Upper mounting brackets
- 2 Lower mounting brackets
- Four 2.5″ – 3.0″ rubber shims w/mounting hardware (four 2-5/8″ bolts / 4 flat washers / 4 lock washers)
- Four 1.5″ – 2.5″ rubber shims w/mounting hardware (four 1-3/4″ bolts / 4 flat washers / 4 lock washers)
- Two 12″ 6-pin wire harnesses w/Deutsch connectors
- 2 Connection cover-plates
- 4 Plastic grommets
- 1/8″ Hex bit
- T-45 Torx wrench
- Instruction manual
- Rockford Fosgate Contact information card
- RZR19PXP-M2FWE:
- M2D4-10IB 10″ DVC subwoofer with stainless-steel Color Optix grille
- Subwoofer enclosure with attached internal 16″ speaker harness
- Add-on enclosure chamber
- 3 Mounting brackets
- Port plug
- M5-1500X5:
- 5-Channel powersports amplifier attached to mounting bracket
- 11″ Power/ground/turn-on & subwoofer output harness (installed)
- 11″ Input harness (installed)
- Amplifier power certificate
- RZR19PXP-K4:
- Pre-configured 15′ wiring harness with 4 AWG Power/ground wires and inline Maxi fuse holder
- Two 10″ foam strips with 3M adhesive backing
- Thirty-two 14″ Wire ties
- Twenty-five 8″ wire ties
- Ten 6″ wire ties with push-fasteners
- Twelve 7″ wire ties with clips
- One rubber grommet
- 1.75″ Hole saw with bit
- PMX-RGB:
- Color Optix Light controller mounted to bracket (attached 1.5′ power/ground/RGB harnesses w/inline 2A ATO fuse)
- Hardware Pack:
- 2 Moto-can terminal covers
- Allen key
- 100A Maxi fuse
- 1 Tube of grease
- Amp mounting clamp with nut and washer
- Nine 7/8″ screws
- Eight 3/4″ screws
- Two 3/4″ Torx screws
- 4 Speed-clips
- Four 1-1/2″ Torx bolts
- Three 25mm Torx bolts
- Six 60mm screws
- Four 1/2″ hex-socket screws
- 4 Flat-washers
- 2 Lock-washers
- Hex-head bit
-
- M5-1500X5:
- 5-Channel powersports amplifier attached to mounting bracket
- 11″ Power/ground/turn-on & subwoofer output harness (installed)
- 11″ Input harness (installed)
- Amplifier power certificate
- RZR19PXP-FSE:
- Two enclosures loaded with 6.5″ 2-way Color Optix speakers (attached 5″ input/tweeter output harnesses)
- Two 16″ tweeter harnesses with inline crossovers
- 2 Rubber caps
- Dash trim piece
- Torx screwdriver
- RZR19PXP-RCA:
- 30″ Ride Command active noise reduction interface
- PMX-RGB:
- Color Optix Light controller mounted to bracket (attached 1.5′ power/ground/RGB harnesses w/inline 2A ATO fuse)
- M1WL-65MB:
- Two M1 6.5″ Color Optix moto-Can speakers w/installed sport grille
- 2 Upper mounting brackets
- 2 Lower mounting brackets
- Four 1.0″ – 1.6″ rubber shims w/mounting hardware (four 1-3/8″ bolts / 4 flat washers / 4 lock washers)
- Four 1.6″ – 2.0″ rubber shims w/mounting hardware (four 1-3/4″ bolts / 4 flat washers / 4 lock washers)
- T-45 Torx wrench
- RZR19PXP-M1FWE:
- M1D4-10B 10″ DVC subwoofer with Color Optix grille
- Subwoofer enclosure with attached internal 16″ speaker harness
- Add-on enclosure chamber
- 3 Mounting brackets
- Port plug
- RZR19PXP-K4:
- Pre-configured 15′ wiring harness with 4 AWG Power/ground wires and inline Maxi fuse holder
- Two 10″ foam strips with 3M adhesive backing
- Thirty-two 14″ Wire ties
- Twenty-five 8″ wire ties
- Ten 6″ wire ties with push-fasteners
- Twelve 7″ wire ties with clips
- One rubber grommet
- 1.75″ Hole saw with bit
- Hardware Pack:
- 2 Moto-can terminal covers
- Allen key
- 100A Maxi fuse
- 1 Tube of grease
- Amp mounting clamp with nut and washer
- Nine 7/8″ screws
- Eight 3/4″ screws
- Two 3/4″ Torx screws
- 4 Speed-clips
- Four 1-1/2″ Torx bolts
- Three 25mm Torx bolts
- Six 60mm screws
- 4 Flat-washers
- 2 Lock-washers
- Hex-head bit
-
- M5-1500X5:
- 5-Channel powersports amplifier attached to mounting bracket
- 11″ Power/ground/turn-on & subwoofer output harness (installed)
- 11″ Input harness (installed)
- Amplifier power certificate
- RZR19PXP-FSE:
- Two enclosures loaded with 6.5″ 2-way Color Optix speakers (attached 5″ input/tweeter output harnesses)
- Two 16″ tweeter harnesses with inline crossovers
- 2 Rubber caps
- Dash trim piece
- Torx screwdriver
- RZR19PXP-RCA:
- 30″ Ride Command active noise reduction interface
- PMX-RGB:
- Color Optix Light controller mounted to bracket (attached 1.5′ power/ground/RGB harnesses w/inline 2A ATO fuse)
- M2-TS:
- 2 Tweeters (with attached 12″ speaker wire terminated with proprietary plugs)
- 2 Crossovers
- 2 Front flush mount trim rings
- Two M4x25mm Machine screws
- Eight 1-3/4″ Stainless steel Allen head screws
- Eight 1″ Stainless steel Allen head screws
- Six 3/8″ Stainless steel Allen head screws
- 3mm Allen head bit
- Eight 7″ Zip-ties
- Installation/Operation instructions (En/ Fr/ Sp/ Others)
- M2WL-65MB:
- Two M2 6.5″ Color Optix moto-Can speakers w/installed stainless-steel grilles
- 2 Upper mounting brackets
- 2 Lower mounting brackets
- Four 1.0″ – 1.6″ rubber shims w/mounting hardware (four 1-3/8″ bolts / 4 flat washers / 4 lock washers)
- Four 1.6″ – 2.0″ rubber shims w/mounting hardware (four 1-3/4″ bolts / 4 flat washers / 4 lock washers)
- T-45 Torx wrench
- RZR19PXP-M2FWE:
- M2D4-10B 10″ DVC subwoofer with stainless-steel Color Optix grille
- Subwoofer enclosure with attached internal 16″ speaker harness
- Add-on enclosure chamber
- 3 Mounting brackets
- Port plug
- RZR19PXP-K4:
- Pre-configured 15′ wiring harness with 4 AWG Power/ground wires and inline Maxi fuse holder
- Two 10″ foam strips with 3M adhesive backing
- Thirty-two 14″ Wire ties
- Twenty-five 8″ wire ties
- Ten 6″ wire ties with push-fasteners
- Twelve 7″ wire ties with clips
- One rubber grommet
- 1.75″ Hole saw with bit
- Hardware Pack:
- 2 Moto-can terminal covers
- Allen key
- 100A Maxi fuse
- 1 Tube of grease
- Amp mounting clamp with nut and washer
- Nine 7/8″ screws
- Eight 3/4″ screws
- Two 3/4″ Torx screws
- 4 Speed-clips
- Four 1-1/2″ Torx bolts
- Three 25mm Torx bolts
- Six 60mm screws
- 4 Flat-washers
- 2 Lock-washers
- Hex-head bit
Showing 49–60 of 71 results