Latest Products
-
Rockford Fosgate RFIT-20
CALL FOR PRICE
-
Rockford Fosgate RFIT-16
CALL FOR PRICE
-
Rockford Fosgate RFIT-10
CALL FOR PRICE
Image
Product
Price
-
- Rockford Fosgate PMX-2:
- Marine digital media receiver
- Trim-ring
- Mounting plate
- Mounting bracket
- Wiring harness
- Backstrap
- 4 Machine screws
- 4 Hex-nuts
- Installation & Operation booklet
- Rockford Fosgate RFGNRL-PMXDK:
- Dash bezel
- PMX-2 harness
- PMX-0 harness
- Power harness
- PMX-2 housing
- PMX-0 housing
- Metal bracket
- 8 Small screws
- 2 Large screws
- 4 Butt-connectors
- 5 Wire-ties
- Installation/Operation Booklet
-
- PMX-2:
- Marine digital media receiver
- Trim-ring
- Mounting plate
- Mounting bracket
- Wiring harness
- Backstrap
- 4 Machine screws
- 4 Hex-nuts
- Installation/Operation booklet
- RFRNGR-PMXDK:
- Trim-panel
- PMX-2 mounting bracket
- PMX-0 mounting bracket
- PMX-2 vehicle harness
- PMX-0 vehicle harness
- Power/ground harness
- Back plate
- Rubber grommet
- 3 Wire-ties
- 8 Screws
- 4 Butt-connectors
- Installation Instructions
-
- PMX-2:
- Marine digital media receiver
- Trim-ring
- Mounting plate
- Mounting bracket
- Wiring harness
- Backstrap
- 4 Machine screws
- 4 Hex-nuts
- Installation/Operation booklet
- RFRNGR-PMXDK:
- Trim-panel
- PMX-2 mounting bracket
- PMX-0 mounting bracket
- PMX-2 vehicle harness
- PMX-0 vehicle harness
- Power/ground harness
- Back plate
- Rubber grommet
- 3 Wire-ties
- 8 Screws
- 4 Butt-connectors
- Installation Instructions
- RM1652B:
- Two 2-way marine speakers (with fixed grilles)
- Eight 1-1/4″ Stainless steel Allen head screws
- 3mm Allen head bit
- 8 Speed clips
- Installation/Operation manual
- RFRNGR-FSE:
- 2 Empty speaker pods
- Two 45″ speaker harnesses
- 2 Bolts
- 4 Screws
- 4 Washers
- 2 Nuts
- Allen screwdriver
- 2 Self-adhesive foam pads
- 6 Wire-ties
- Installation Instructions
-
- PMX-2:
- Marine digital media receiver
- Trim-ring
- Mounting plate
- Mounting bracket
- Wiring harness
- Backstrap
- 4 Machine screws
- 4 Hex-nuts
- Installation/Operation booklet
- RFRNGR-PMXDK:
- Trim-panel
- PMX-2 mounting bracket
- PMX-0 mounting bracket
- PMX-2 vehicle harness
- PMX-0 vehicle harness
- Power/ground harness
- Back plate
- Rubber grommet
- 3 Wire-ties
- 8 Screws
- 4 Butt-connectors
- Installation Instructions
- RM1652B:
- Two 2-way marine speakers (with fixed grilles)
- Eight 1-1/4″ Stainless steel Allen head screws
- 3mm Allen head bit
- 8 Speed clips
- Installation/Operation manual
- RFRNGR-FSE:
- 2 Empty speaker pods
- Two 45″ speaker harnesses
- 2 Bolts
- 4 Screws
- 4 Washers
- 2 Nuts
- Allen screwdriver
- 2 Self-adhesive foam pads
- 6 Wire-ties
- Installation Instructions
- TM400X4AD:
- 4-Channel moto-marine amplifier
- Power/ground/turn-on plug (installed)
- Two 8″ Speaker output harnesses (bare wire to 4-pin Molex)
- Two 14″ Input harnesses (2 RCA to 4-pin Molex)
- Setup Disc (CD)
- Amplifier Quick Setup
- Certificate of Performance Verification
- RM110D2B:
- 10″ Woofer
- Grille
- 8 Screws
- Installation & Operation booklet
- RFNGR-FWE:
- Subwoofer enclosure
- 11.5′ Harness
- 14″ Red wire
- Mounting bracket
- 4 Strips of foam tape
- 8 Wire-ties
- 3 Cable-clamps
- Installation & Operation booklet
- RFRNGR-K8:
- Wiring harness (inline 60A Maxi-fuse)
- Mounting plate
- 4 Screws
- 9 Wire-ties
- 3 Cable-clamps
- Installation & Operation booklet
-
- PMX-2:
- Marine digital media receiver
- Trim-ring
- Mounting plate
- Mounting bracket
- Wiring harness
- Backstrap
- 4 Machine screws
- 4 Hex-nuts
- Installation/Operation booklet
- RFRNGR-PMXDK:
- Trim-panel
- PMX-2 mounting bracket
- PMX-0 mounting bracket
- PMX-2 vehicle harness
- PMX-0 vehicle harness
- Power/ground harness
- Back plate
- Rubber grommet
- 3 Wire-ties
- 8 Screws
- 4 Butt-connectors
- Installation Instructions
- RM1652B:
- Two 2-way marine speakers (with fixed grilles)
- Eight 1-1/4″ Stainless steel Allen head screws
- 3mm Allen head bit
- 8 Speed clips
- Installation/Operation manual
- RFRNGR-FSE:
- 2 Empty speaker pods
- Two 45″ speaker harnesses
- 2 Bolts
- 4 Screws
- 4 Washers
- 2 Nuts
- Allen screwdriver
- 2 Self-adhesive foam pads
- 6 Wire-ties
- Installation Instructions
- TM400X4AD:
- 4-Channel moto-marine amplifier
- Power/ground/turn-on plug (installed)
- Two 8″ Speaker output harnesses (bare wire to 4-pin Molex)
- Two 14″ Input harnesses (2 RCA to 4-pin Molex)
- Setup Disc (CD)
- Amplifier Quick Setup
- Certificate of Performance Verification
- RM110D2B:
- 10″ Woofer
- Grille
- 8 Screws
- Installation & Operation booklet
- RFNGR-FWE:
- Subwoofer enclosure
- 11.5′ Harness
- 14″ Red wire
- Mounting bracket
- 4 Strips of foam tape
- 8 Wire-ties
- 3 Cable-clamps
- Installation & Operation booklet
- RM1652W-MB:
- 2 Wakeboard tower speakers
- 2 Mounting couplers
- Two 16″ Speaker harnesses
- 4 Plastic grommets
- 4 Mounting bolts
- 2 Security bolts (pre-installed)
- 4 Nuts
- 2 Safety lanyards
- 2 Lanyard washers
- Torx wrench
- Installation & Operation Manual
- RFRNGR-K8:
- Wiring harness (inline 60A Maxi-fuse)
- Mounting plate
- 4 Screws
- 9 Wire-ties
- 3 Cable-clamps
- Installation & Operation booklet
- PM-CL3B:
- Mounting clamps
- 2 Self-adhesive logos
- 2 Rubber inserts
- 6 Wire-ties
- RFRNGR-RSW16: Two 18′ speaker cables
- 4 Long wire-ties
- 12 Short wire-ties
- Installation Instructions
-
- PMX-1 Media Receiver:
- Marine digital media receiver
- Trim-ring
- Mounting plate
- Mounting bracket
- Wiring harness
- 4 Machine screws
- 4 Hex-nuts
- Operation Manual
- M0-65B 6.5″ Coax Speakers (x2):
- Two 2-way marine speakers
- Twelve 1-1/4″ Stainless steel Allen head screws
- Two 3mm Allen head bits
- 3.5mm Drill bit
- Instruction manual (English/ French/ Spanish/ German/ Italian)
- Rockford Fosgate contact information
- RNGR18-DK Dash Kit:
- Mounting bracket
- Trim panel
- 31″ Wiring harness
- 6′ Antenna wire w/ Motorola connector
- Five 8″ wire ties
- Eight 5/8″ screws
- Rockford Fosgate support information
- RNGR18-FSE Front Speaker Enclosures:
- 2 Speaker enclosures w/ attached 57″ external speaker wire and 10″ internal speaker wire
- Four 1-1/2″ Torx screws (T35)
- Six 8″ wire ties
- Rockford Fosgate support information
- RNGR18-RSE Rear Speaker Enclosures:
- 2 Bottom sections
- 2 Top sections
- 22′ Speaker wire harness
- Fourteen 1″ screws
- 2 Spacer disks (2-seater only)
- Four 8″ wire ties w/ attached clips
- Four 6.5″ wire ties w/ attached push-fasteners
- Eight 8″ wire ties
- Rockford Fosgate support information
- RNGR18-Tool Kit:
- Three 2″ rubber grommets
- 1/4″ Drill bit w/ attached 1-3/4″ hole saw
-
- PMX-3:Marine digital media receiver with attached 5″ wiring harness
- RNGR18-DK:
- Mounting bracket
- Trim panel
- 31″ Wiring harness
- 6′ Antenna wire w/ Motorola connector
- Five 8″ wire ties
- Eight 5/8″ screws
- Rockford Fosgate support information
- M5-1500X5 Amplifier:
- 5-Channel powersports amplifier
- 11″ Power/ground/turn-on & subwoofer output harness (installed on amp)
- 11″ Input harness (installed on amp)
- Three 14″ RCA-to-Molex input adapters
- Power/ground/turn-on adapter plug
- Subwoofer output adapter plug
- Two 7.5″ speaker output harnesses
- 3mm Allen key
- Owner’s manual
- Performance certificate
- Contact information
- M2-65B Speakers (x2):
- Two 6.5″ 2-way marine speakers
- 2 Centrex plastic grilles (Black)
- 2 Stainless steel grilles
- 2 Grille rings (Black)
- Two 11″ LED power harnesses with 4-pin Deutsch connectors on one end
- Twelve 1-3/4″ Stainless steel Allen head screws
- 3mm Allen head bit
- 3.5mm Drill bit
- Instruction manual (English/ French/ Spanish/ German/ Italian)
- M2D4-10IB Subwoofer:
- One 10″ marine subwoofer
- 1 Centrex plastic grille (black)
- 1 Stainless steel grille
- 1 Grille ring (black)
- One 11″ LED power harness with 4-pin Deutsch connector on one end
- Six 2-3/8″ Stainless steel Allen head screws
- 4mm Allen head bit
- 4.5mm Drill bit
- Instruction manual (English/ French/ Spanish/ German/ Italian)
- PMX-RGB Color Optix Light Controller:
- LED Controller w/ attached 17″ LED cables and 17″ power/ground harness (inline 2A ATC fuse)
- 6″ Power/ground harness adapter
- Two 3/4″ machine-screws
- 2 Nuts
- 2 Lock-washers
- Installation manual
- RNGR18-FSE:
- 2 Unloaded speaker pods with attached 57″ wire harness
- Four 1-1/2″ mounting screws
- Five 8″ wire-ties
- Rockford Fosgate contact information
- RNGR18-RSE:
- 2 Unloaded rear speaker enclosures (each with top and bottom section)
- 22′ Rear speaker wire harness
- Eight 8″ wire-ties
- Four 8″ wire-ties with clips
- Four 6″ wire-ties with push-fasteners
- Fourteen 1″ screws
- 2 Spacers (for 2-seat version)
- Rockford Fosgate contact information
- RNGR18-FWE:
- Unloaded subwoofer enclosure with attached 24″ internal speaker harness
- Mounting plate
- Rubber port cap
- 15.5′ Subwoofer wire harness
- One 15″ wire-tie
- Nine 8″ wire-ties
- One wire clamp
- Three 1-1/2″ hex-socket screws
- Two 1″ bolts
- One 1/2″ screw
- 2 Flat-washers
- 2 Lock-washers
- Rockford Fosgate contact information
- RNGR18-K4 Amplifier Mounting & Wiring Kit:
- Amplifier mounting bracket
- 12′ Power/ground/speaker harness (4 AWG with inline fuse-holder and 100A Maxi fuse installed)
- 3′ Front/Rear RCA to Molex harness
- Nine 8″ wire-ties
- Three 6″ wire-ties with push-fasteners
- Four 3/8″ screws
- Rockford Fosgate contact information
-
-
- his Ride Command system contains 11 individually boxed items along with Rockford Fosgate Ride Command tuning information:
- M5-1500X5 Amplifier:
- 5-Channel powersports amplifier
- 11″ Power/ground/turn-on & subwoofer output harness (installed on amp)
- 11″ Input harness (installed on amp)
- Three 14″ RCA-to-Molex input adapters
- Power/ground/turn-on adapter plug
- Subwoofer output adapter plug
- Two 7.5″ speaker output harnesses
- 3mm Allen key
- Owner’s manual
- Performance certificate
- Contact information
- M2-65B Speakers (x2):
- Two 6.5″ 2-way marine speakers
- 2 Centrex plastic grilles (Black)
- 2 Stainless steel grilles
- 2 Grille rings (Black)
- Two 11″ LED power harnesses with 4-pin Deutsch connectors on one end
- Twelve 1-3/4″ Stainless steel Allen head screws
- 3mm Allen head bit
- 3.5mm Drill bit
- Instruction manual (English/ French/ Spanish/ German/ Italian)
- M2D4-10IB Subwoofer:
- One 10″ marine subwoofer
- 1 Centrex plastic grille (black)
- 1 Stainless steel grille
- 1 Grille ring (black)
- One 11″ LED power harness with 4-pin Deutsch connector on one end
- Six 2-3/8″ Stainless steel Allen head screws
- 4mm Allen head bit
- 4.5mm Drill bit
- Instruction manual (English/ French/ Spanish/ German/ Italian)
- PMX-RGB Color Optix Light Controller:
- LED Controller w/ attached 17″ LED cables and 17″ power/ground harness (inline 2A ATC fuse)
- 6″ Power/ground harness adapter
- Two 3/4″ machine-screws
- 2 Nuts
- 2 Lock-washers
- Installation manual
- RFPOL-RC5:
- Polaris Ride Command interface (attached 12″ input and 5″ output harnesses)
- Instructions
- RNGR18-FSE:
- 2 Unloaded speaker pods with attached 57″ wire harness
- Four 1-1/2″ mounting screws
- Five 8″ wire-ties
- Rockford Fosgate contact information
- RNGR18-RSE:
- 2 Unloaded rear speaker enclosures (each with top and bottom section)
- 22′ Rear speaker wire harness
- Eight 8″ wire-ties
- Four 8″ wire-ties with clips
- Four 6″ wire-ties with push-fasteners
- Fourteen 1″ screws
- 2 Spacers (for 2-seat version)
- Rockford Fosgate contact information
- RNGR18-FWE:
- Unloaded subwoofer enclosure with attached 24″ internal speaker harness
- Mounting plate
- Rubber port cap
- 15.5′ Subwoofer wire harness
- One 15″ wire-tie
- Nine 8″ wire-ties
- One wire clamp
- Three 1-1/2″ hex-socket screws
- Two 1″ bolts
- One 1/2″ screw
- 2 Flat-washers
- 2 Lock-washers
- Rockford Fosgate contact information
- RNGR18-K4 Amplifier Mounting & Wiring Kit:
- Amplifier mounting bracket
- 12′ Power/ground/speaker harness (4 AWG with inline fuse-holder and 100A Maxi fuse installed)
- 3′ Front/Rear RCA to Molex harness
- Nine 8″ wire-ties
- Three 6″ wire-ties with push-fasteners
- Four 3/8″ screws
- Rockford Fosgate contact information
- RNGR18-Tool Kit:
- Three 2″ rubber grommets
- Drill bit with 1-3/4″ hole-saw
-
-
- M5-800X4 Amplifier:
- 4-Channel powersports amplifier
- 11″ Power/ground/turn-on & speaker output harness (installed on amp)
- 11″ Input harness (installed on amp)
- Two 14″ RCA-to-Molex input adapters
- Power/ground/turn-on adapter plug
- Two 7.5″ speaker output harnesses
- 3mm Allen key
- Owner’s manual
- Performance certificate
- Contact information
- M1-65B 6.5″ Speakers:
- Two 2-way marine speakers
- Two 11″ LED power harnesses with 4-pin Deutsch connectors on one end
- Twelve 1-1/4″ Stainless steel Allen head screws
- Two 3mm Allen head bits
- 3.5mm Drill bit
- Instruction manual (English/ French/ Spanish/ German/ Italian)
- Rockford Fosgate contact information
- M1D2-10B Subwoofer:
- One 10″ marine subwoofer
- One 11″ LED power harnesses with 4-pin Deutsch connector on one end
- Six 1-3/4″ Stainless steel Allen head screws
- 4mm Allen head bit
- 4.5mm Drill bit
- Instruction manual (English/ French/ Spanish/ German/ Italian)
- Rockford Fosgate contact information
- PMX-RGB Color Optix Light Controller:
- LED Controller w/ attached 17″ LED cables and 17″ power/ground harness (inline 2A ATC fuse)
- 6″ Power/ground harness adapter
- Two 3/4″ machine-screws
- 2 Nuts
- 2 Lock-washers
- Installation manual
- RZR14-FWE Subwoofer Enclosure:
- Subwoofer enclosure w/ attached 28″ internal speaker wire
- 30″ Wiring harness
- 1 Port plug
- Two 1″ screws
- 2 Flat-washers
- Two 1-1/2″ adhesive foam pads
- One 14″ section of bare-ended red wire
- Five 8″ wire-ties
- One 14″ wire-tie
- Contact information
- RZR14-FSE 6.5″ Enclosures:
- 2 Empty speaker pods w/ attached 38″ wire harness
- 2 Threaded studs
- 4 Mounting screws
- 2 Mounting bolts
- 6 Washers
- Hex-head screwdriver
- Five 8″ wire-ties
- Rockford Fosgate Contact information
- RZR14-K8 Amplifier Wiring Kit:
- 9.5′ Power/ground/speaker harness (inline 60A Maxi fuse)
- Two 30″ RCA-to-Molex harnesses
- 2 Amplifier mounting plates (large & small)
- Two 25mm Torx-socket screws
- One 12mm Torx-socket screw
- Four 10mm Torx-socket screws
- Twenty 8″ Wire-ties
- Four 6″ zip-ties w/ push-fastener ends
- Installation manual
- RFPOL-RC34:
- Polaris Ride Command interface (attached 12″ input and 5″ output harnesses)
- Instructions
-
- M5-800X4 Amplifier:
- 4-Channel powersports amplifier
- 11″ Power/ground/turn-on & speaker output harness (installed on amp)
- 11″ Input harness (installed on amp)
- Two 14″ RCA-to-Molex input adapters
- Power/ground/turn-on adapter plug
- Two 7.5″ speaker output harnesses
- 3mm Allen key
- Owner’s manual
- Performance certificate
- Contact information
- M1-65B 6.5″ Speakers:
- Two 2-way marine speakers
- Two 11″ LED power harnesses with 4-pin Deutsch connectors on one end
- Twelve 1-1/4″ Stainless steel Allen head screws
- Two 3mm Allen head bits
- 3.5mm Drill bit
- Instruction manual (English/ French/ Spanish/ German/ Italian)
- Rockford Fosgate contact information
- M1WL-65MB Moto-Can Speakers:
- Two M1 6.5″ Moto-Can speakers w/installed sport grille
- 2 Upper mounting brackets
- 2 Lower mounting brackets
- Four 1.0″ – 1.6″ rubber shims w/mounting hardware (four 1-3/8″ bolts / 4 flat washers / 4 lock washers)
- Four 1.6″ – 2.0″ rubber shims w/mounting hardware (four 1-3/4″ bolts / 4 flat washers / 4 lock washers)
- Two 12″ 6-pin wire harnesses w/Deutsch connectors and integrated rubber seals
- 2 Connection cover-plates
- 4 Plastic grommets
- 1/8″ Hex bit
- T-45 Torx wrench
- Instruction manual
- Contact information card
- M1D2-10B Subwoofer:
- One 10″ marine subwoofer
- One 11″ LED power harnesses with 4-pin Deutsch connector on one end
- Six 1-3/4″ Stainless steel Allen head screws
- 4mm Allen head bit
- 4.5mm Drill bit
- Instruction manual (English/ French/ Spanish/ German/ Italian)
- Rockford Fosgate contact information
- PMX-RGB Color Optix Light Controller:
- LED Controller w/ attached 17″ LED cables and 17″ power/ground harness (inline 2A ATC fuse)
- 6″ Power/ground harness adapter
- Two 3/4″ machine-screws
- 2 Nuts
- 2 Lock-washers
- Installation manual
- RZR14-FWE Subwoofer Enclosure:
- Subwoofer enclosure w/ attached 28″ internal speaker wire
- 30″ Wiring harness
- 1 Port plug
- Two 1″ screws
- 2 Flat-washers
- Two 1-1/2″ adhesive foam pads
- One 14″ section of bare-ended red wire
- Five 8″ wire-ties
- One 14″ wire-tie
- Contact information
- RZR14-FSE 6.5″ Enclosures:
- 2 Empty speaker pods w/ attached 38″ wire harness
- 2 Threaded studs
- 4 Mounting screws
- 2 Mounting bolts
- 6 Washers
- Hex-head screwdriver
- Five 8″ wire-ties
- Rockford Fosgate Contact information
- MX-RSW16 Speaker Harnesses:
- Two 17.5′ Rear speaker harnesses
- Six 6″ wire-ties w/ push-fastener ends
- Sixteen 7.5″ wire-ties
- Contact information card
- RZR14-K8 Amplifier Wiring Kit:
- 9.5′ Power/ground/speaker harness (inline 60A Maxi fuse)
- Two 30″ RCA-to-Molex harnesses
- 2 Amplifier mounting plates (large & small)
- Two 25mm Torx-socket screws
- One 12mm Torx-socket screw
- Four 10mm Torx-socket screws
- Twenty 8″ Wire-ties
- Four 6″ zip-ties w/ push-fastener ends
- Installation manual
- RFPOL-RC34:
- Polaris Ride Command interface (attached 12″ input and 5″ output harnesses)
- Instructions
-
- M5-1500X5 Amplifier:
- 5-Channel powersports amplifier
- 11″ Power/ground/turn-on & subwoofer output harness (installed on amp)
- 11″ Input harness (installed on amp)
- Three 14″ RCA-to-Molex input adapters
- Power/ground/turn-on adapter plug
- Subwoofer output adapter plug
- Two 7.5″ speaker output harnesses
- 3mm Allen key
- Owner’s manual
- Performance certificate
- Contact information
- M2WL-65MB Moto-Can Speakers:
- Two M2 6.5″ Moto-Can speakers w/stainless steel grilles installed
- 2 Black plastic sport grilles
- 2 Upper mounting brackets
- 2 Lower mounting brackets
- Four 1.0″ – 1.6″ rubber shims w/mounting hardware (four 1-3/8″ bolts / 4 flat washers / 4 lock washers)
- Four 1.6″ – 2.0″ rubber shims w/mounting hardware (four 1-3/4″ bolts / 4 flat washers / 4 lock washers)
- Two 12″ 6-pin wire harnesses w/Deutsch connectors and integrated rubber seals
- 2 Connection cover-plates
- 4 Plastic grommets
- 1/8″ Hex bit
- T-45 Torx wrench
- Instruction manual
- Contact information card
- M2-65B Speakers:
- Two 6.5″ 2-way marine speakers
- 2 Centrex plastic grilles (Black)
- 2 Stainless steel grilles
- 2 Grille rings (Black)
- Two 11″ LED power harnesses with 4-pin Deutsch connectors on one end
- Twelve 1-3/4″ Stainless steel Allen head screws
- 3mm Allen head bit
- 3.5mm Drill bit
- Instruction manual (English/ French/ Spanish/ German/ Italian)
- M2D4-10IB Subwoofer:
- One 10″ marine subwoofer
- 1 Centrex plastic grille (black)
- 1 Stainless steel grille
- 1 Grille ring (black)
- One 11″ LED power harness with 4-pin Deutsch connector on one end
- Six 2-3/8″ Stainless steel Allen head screws
- 4mm Allen head bit
- 4.5mm Drill bit
- Instruction manual (English/ French/ Spanish/ German/ Italian)
- PMX-RGB Color Optix Light Controller:
- LED Controller w/ attached 17″ LED cables and 17″ power/ground harness (inline 2A ATC fuse)
- 6″ Power/ground harness adapter
- Two 3/4″ machine-screws
- 2 Nuts
- 2 Lock-washers
- Installation manual
- RZR14-FWE Subwoofer Enclosure:
- Sub enclosure w/ attached 28″ internal speaker wire
- 30″ Wiring harness
- Two 1″ screws
- 2 Flat-washers
- Two 1-1/2″ adhesive foam pads
- One 14″ section of bare-ended red wire
- Five 8″ zip-ties
- One 14″ zip-tie
- 1 Port plug
- Rockford Fosgate contact information
- RFPOL-RC5:
- Polaris Ride Command interface (attached 12″ input and 5″ output harnesses)
- Instructions
- RZR14-FSE Speaker Pods:
- 2 Empty speaker pods w/ attached 38″ wire harness
- 2 Threaded studs
- 4 Mounting screws
- 2 Mounting bolts
- 6 Washers
- Hex-head screwdriver
- Five 8″ zip-ties
- Rockford Fosgate contact information
- RZR14-K4 Amplifier Wiring Kit:
- 9.5′ Power/ground/speaker harness (4 AWG w/ inline fuse-holder and 100A Maxi fuse installed)
- 30″ Front/Rear RCA to Molex harness
- 2 Amplifier mounting plates
- Two 25mm Torx-socket screws (T30)
- One 12mm Torx-socket screw (T30)
- Four 10mm Torx-socket screws (T10)
- Twenty 8″ Wire-ties
- Four 6″ zip-ties w/ push-fastener ends
- Rockford Fosgate contact information
- MX-RSW16 Speaker Harnesses:
- Two 17.5′ Rear speaker harnesses
- Six 6″ wire-ties w/ push-fastener ends
- Sixteen 7.5″ wire-ties
- Contact information card
-
- M5-1500X5 Amplifier:
- 5-Channel powersports amplifier
- 11″ Power/ground/turn-on & subwoofer output harness (installed on amp)
- 11″ Input harness (installed on amp)
- Three 14″ RCA-to-Molex input adapters
- Power/ground/turn-on adapter plug
- Subwoofer output adapter plug
- Two 7.5″ speaker output harnesses
- 3mm Allen key
- Owner’s manual
- Performance certificate
- Contact information
- M2WL-8HB Wake Tower Speakers:
- Two M2 8″ waketower speakers (black) w/stainless steel grilles
- 2 Plastic sport grilles (black)
- 2 Upper mounting brackets
- 2 Lower mounting brackets
- Four 2.5″ – 3.0″ rubber shims w/mounting hardware (four 2-5/8″ bolts / 4 flat washers / 4 lock washers)
- Four 2.5″ – 3.0″ rubber shims w/mounting hardware (four 1-3/4″ bolts / 4 flat washers / 4 lock washers)
- Two 12″ 6-pin wire harnesses w/Deutsch connectors
- 2 Connection cover-plates
- 4 Plastic grommets
- 1/8″ Hex bit
- T-45 Torx wrench
- Instruction manual
- Contact information card
- M2-65B Speakers:
- Two 6.5″ 2-way marine speakers
- 2 Centrex plastic grilles (Black)
- 2 Stainless steel grilles
- 2 Grille rings (Black)
- Two 11″ LED power harnesses with 4-pin Deutsch connectors on one end
- Twelve 1-3/4″ Stainless steel Allen head screws
- 3mm Allen head bit
- 3.5mm Drill bit
- Instruction manual (English/ French/ Spanish/ German/ Italian)
- M2D4-10IB Subwoofer:
- One 10″ marine subwoofer
- 1 Centrex plastic grille (black)
- 1 Stainless steel grille
- 1 Grille ring (black)
- One 11″ LED power harness with 4-pin Deutsch connector on one end
- Six 2-3/8″ Stainless steel Allen head screws
- 4mm Allen head bit
- 4.5mm Drill bit
- Instruction manual (English/ French/ Spanish/ German/ Italian)
- PMX-RGB Color Optix Light Controller:
- LED Controller w/ attached 17″ LED cables and 17″ power/ground harness (inline 2A ATC fuse)
- 6″ Power/ground harness adapter
- Two 3/4″ machine-screws
- 2 Nuts
- 2 Lock-washers
- Installation manual
- RZR14-FWE Subwoofer Enclosure:
- Sub enclosure w/ attached 28″ internal speaker wire
- 30″ Wiring harness
- Two 1″ screws
- 2 Flat-washers
- Two 1-1/2″ adhesive foam pads
- One 14″ section of bare-ended red wire
- Five 8″ zip-ties
- One 14″ zip-tie
- 1 Port plug
- Rockford Fosgate contact information
- RFPOL-RC5:
- Polaris Ride Command interface (attached 12″ input and 5″ output harnesses)
- Instructions
- RZR14-FSE Speaker Pods:
- 2 Empty speaker pods w/ attached 38″ wire harness
- 2 Threaded studs
- 4 Mounting screws
- 2 Mounting bolts
- 6 Washers
- Hex-head screwdriver
- Five 8″ zip-ties
- Rockford Fosgate contact information
- RZR14-K4 Amplifier Wiring Kit:
- 9.5′ Power/ground/speaker harness (4 AWG w/ inline fuse-holder and 100A Maxi fuse installed)
- 30″ Front/Rear RCA to Molex harness
- 2 Amplifier mounting plates
- Two 25mm Torx-socket screws (T30)
- One 12mm Torx-socket screw (T30)
- Four 10mm Torx-socket screws (T10)
- Twenty 8″ Wire-ties
- Four 6″ zip-ties w/ push-fastener ends
- Rockford Fosgate contact information
- MX-RSW16 Speaker Harnesses:
- Two 17.5′ Rear speaker harnesses
- Six 6″ wire-ties w/ push-fastener ends
- Sixteen 7.5″ wire-ties
- Contact information card
Showing 1–12 of 27 results