Marine/Powersports

Channels 1
Power Supply
Power supply voltage / fuse: 11÷15 VDC / 1 x 15 A
Idling current (power ON/OFF): 1 A / 0.04 mA
Consumption @ 2Ω, 14.4 VDC (Max Musical Power): 15 A
Remote In: 4 ÷ 15 VDC – 1 mA
ART : Automatic Remote Turn-On/Off
Amplifier Stage
Distortion – THD (100 Hz @ 4Ω): 0.1 %
Bandwidth: 10 ÷ 500 Hz
S/N Ratio (A weighted @ 1 V): 105 dB
Damping factor (100 Hz @ 4Ω): 300
Pre-In sensitivity: LO: 0.2 ÷ 5 V
HI: 0.8 ÷ 20 V
Load impedance (MIN) @ 2 Ch: 2Ω
Max size (mm/in.): 223 x 100.5 x 43.6 / 8.77 x 3.95 x 1.70
Weight (kg/lb.): 1.35 / 2.97
Adjustable Crossovers yes

Component Two way coaxial
Size mm (in.) 165 (6.5)
Power Handling – Continuous W 75
Power Handling – Peak W 150
Impedance Ohm 4
Depth mm (in.) 95,6 (3.76)
Tweeter diaphragm mm (in.) 36 (1.4)
Woofer Voice Coil Ø mm (in.) 25 (1)
Tweeter Voice Coil Ø mm (in.) 20 (0.8)
Frequency Response Hz 50 ÷ 25k
Woofer Magnet size D x d x h mm (in.) 78,5 x 32 x 17 (3.09 x 1.26 x 0.67)
Tweeter Magnet size D x h mm (in.) 19,7 x 3 (0.78 x 0.12)
Weight of one speaker kg (lb.) 1 (2.2)
Woofer Magnet High density flux ferrite
Tweeter Magnet Neodymium
Cone Polypropylene with UV inhibitors
Dome PEI
Xmech mm (in.) ±6,65 (0.26)

Brand HERTZ
Speaker Type Woofer
Connectivity Technology Coaxial
Recommended Uses For Product Vehicle
Subwoofer Diameter 6.5 Inches

About this item
Speaker Component: Two-way Coaxial
Santoprene Rubber
Tweeter Design: 1.4″ Dome
Tweeter Composition: PEI
Impedance: 4 Ohms

Note: Products with electrical plugs are designed for use in the US. Outlets and voltage differ internationally and this product may require an adapter or converter for use in your destination. Please check compatibility before purchasing.

Component Powersport coaxial
Size mm (in.) 200 (8)
Power Handling – Continuous W 100
Power Handling – Peak W 200
Impedance Ohm 4
Depth mm (in.) 123 (4.84)
Tweeter diaphragm mm (in.) 36 (1.4)
Woofer Voice Coil Ø mm (in.) 32 (1.26)
Tweeter Voice Coil Ø mm (in.) 20 (0.8)
Frequency Response Hz 45 ÷ 25k
Woofer Magnet size D x d x h mm (in.) 90 x 40 x 20 (3.54 x 1.57 x 0.79)
Tweeter Magnet size D x h mm (in.) 19,7 x 3 (0.78 x 0.12)
Weight of one speaker kg (lb.) 1,66 (3.66)
Woofer Magnet High density flux ferrite
Tweeter Magnet Neodymium
Cone Polypropylene with UV inhibitors
Dome PEI
Xmech mm (in.) ±8,5 (0.33)

Component POWERSPORTS COAX RGB LED
Size mm (in.) 200 (8)
Power Handling – Continuous W 100
Power Handling – Peak W 200
Impedance Ohm 4
Depth mm (in.) 123 (4.84)
Tweeter diaphragm mm (in.) 36 (1.4)
Woofer Voice Coil Ø mm (in.) 32 (1.26)
Tweeter Voice Coil Ø mm (in.) 20 (0.8)
Frequency Response Hz 45 ÷ 25k
Woofer Magnet size D x d x h mm (in.) 90 x 40 x 20 (3.54 x 1.57 x 0.79)
Tweeter Magnet size D x h mm (in.) 19,7 x 3 (0.78 x 0.12)
Weight of one speaker kg (lb.) 1,66 (3.66)
Woofer Magnet High density flux ferrite
Tweeter Magnet Neodymium
Cone Polypropylene with UV inhibitors
Dome PEI
Xmech mm (in.) ±8,5 (0.33)

Channels 4 – 3 – 2
Nominal power supply voltage 11 ÷ 15 VDC
Pulse Operating voltage 6 ÷ 16 VDC
Idling current 1.1 A
Idling current when off 0.03 mA
Consumption @ 14.4 VDC, MIN load impedance (Max Musical Power) 50 A
Remote IN 6 ÷ 15 VDC (9 mA)
DC-REM – Remote Turn on by SPK DC from OUTPUT BTL speakers 3.5 ÷ 7 VDC
Distortion – THD @ 1 kHz, 4Ω, 70% Rated Power 0.02%
Damping factor @ 1 kHz, 4Ω, 2 VRMS 200
Bandwidth @ -3 dB 10 Hz ÷35 kHz
S/N ratio (A weighted @ 1 V Input) 105 dBA
Pre-In sensitivity 0.6 ÷ 6 VRMS
Speaker-In sensitivity 2.2 ÷ 22 VRMS
Minimum load impedance:
@ 4Ch 2Ω
@ 3Ch 2Ω + 2Ω + 4Ω
@ 2Ch 4Ω
IP Rating IP55
Operating Temperature Range 0°C (32°F) to 55°C (131°F)
Max size (mm/inch) 211.6 x 130 x 49 / 8.33 x 5.118 x 1.929
Weight (kg/lbs) 2.15 / 4.74
Adjustable Crossovers yes
Output Power
Output Nominal Power (RMS) @ 14.4 VDC, THD 1%:
4 Ch: 160 W x 4 (4Ω)
4 Ch: 250 W x 4 (2Ω)
3 Ch: 160 W x 2 (4Ω) + 500 W x 1 (4Ω)
3 Ch: 250 W x 2 (2Ω) + 500 W x 1 (4Ω)
2 Ch: 500 W x 2 (4Ω)
Total Power RMS 1000 W
INPUTS / FILTERS
INPUTS: Pre IN / Speaker IN
Ch 1-2
Full –
Hi-pass 50 ÷ 5k Hz @ 12 dB/Oct.
Lo-pass: 50 ÷ 5k Hz @ 12 dB/Oct.
Ch 3-4
Full –
Hi-pass 50 ÷ 5k Hz @ 12 dB/Oct.
Lo-pass 50 ÷ 5k Hz @ 12 dB/Oct.
Bass Boost 45Hz (adjustable) (0 ÷ 8) dB [LP = ON only]