Tweeters

Image
SKU
Product
Rating
Price
  • Audison TH 1.5 II Violino
    SKU: TH 1.5 ll Violino
    • Power Handling: 200 (Hi-Pass filtered @ 1,8kHz – 12 dB Oct.) W peak
    • Impedance: 6 Ohm
    • Frequency Response: 800 ÷ 26k Hz
    • Sensitivity: 93 dB/Spl
    • Magnet: N38 “H-grade” Neodymium
  • Hertz DT 24.3
    SKU: DT 24.3
    • Two DT 24.3 Tweeters (with attached 6″ length of speaker wire)
    • Two DX 100.3 Crossovers
    • 2 Flush mount trim rings
    • 2 Flush mount clamps
    • 2 Angled surface mount housings
    • 2 Grilles (installed)
    • 2 Rectangular adhesive foam pads
    • 2 Round adhesive foam pads
    • Owner’s manual (English/ Spanish/ French/ German/ Italian/ Portuguese/ 20 Others)
  • Morel Elate Carbon Alto
    SKU: ELATE CARBON ALTO
    • 2 Alto Tweeters (with attached 7″ length of speaker wire)
    • 2 Grilles (installed)
    • Six 3/4″ Screws
    • 6 Speed clips
    • Installation guide
    • Warranty card
  • Morel MT 450
    SKU: MT450
    • 2 MT 450 Tweeters (with attached 7″ length of speaker wire)
    • 2 Grilles (installed)
    • 2 Flush mount housings (tweeters installed)
    • 2 Flush mount clamps
    • 2 Angled surface mount housings
    • Four 3/4″ Screws
    • Installation guide
  • Morel MT300
    SKU: MT300
    • Two MT300 Tweeters (with attached 7″ length of speaker wire)
    • 2 Flush mount tweeter housings (with tweeters installed)
    • 2 Flush mount brackets
    • 2 Angled surface mount tweeter housings
    • Four 1″ Screws
    • Installation guide
  • Morel SUPREMO PICCOLO LOTUS
    SKU: SUPREMO PICCOLO LOTUS
    • Supremo Piccolo uses a 28mm (1.1″) Acuflex™ coated soft dome resulting in wider dispersion and smoother tonal characteristics. This enables hours of tireless listening pleasure.
    • The large Hexatech ™ aluminum voice coil and powerful neodymium flat pancake magnet design offer interference-free reproduction and higher power handling.
    • The Supremo Piccolo is available in a 675mm diameter faceplate: ideal for dash and A-pillar installations in most cars.
    • The Supremo Piccolo complements the Supremo woofer perfectly, with an exceptionally low resonance point and a flat frequency response.
  • Rockford Fosgate Punch P1T-S
    SKU: P1T-S
    • Two 1″ tweeters (with attached 6″ speaker wire terminated with female quick-slide connectors)
    • 2 Crossovers
    • 2 Front flush mount brackets
    • 2 Rear flush mount brackets
    • 2 Surface mounting housings
    • 2 Trim rings
    • Two M4x25mm Machine screws
    • Two M4x10mm Machine screws
    • Two M4x16mm Stud bolts
    • Two 40″ Lengths of speaker wire (each with male quick slides on one end and female quick slides on the other)
    • Two 40″ Lengths of speaker wire (each with female quick slides on one end and bare wire on the other)
    • Four 7″ Zip ties
    • Installation/Operation Instructions (English/ French/ Spanish/ German/ Italian)
  • Rockford Fosgate R1T-S
    SKU: R1T-S
    • 2 Tweeters (with attached 6′ speaker wire terminated by quick-slide connectors)
    • 2 Flush mounting brackets (installed)
    • 2 Flush mount retaining rings
    • 2 Surface mounting brackets
    • Four 5/8″ Flat head screws
    • Installation and Operation instructions (English/ French/ Spanish/ German/ Italian)
  • Rockford Fosgate T1T-S
    SKU: T1T-S
    • 2 Tweeters (with attached 6″ speaker wire terminated with female quick-slide connectors)
    • 2 Crossovers
    • 2 Front flush mount tweeter brackets
    • 2 Rear flush mount tweeter brackets
    • 2 Surface mount tweeter housings
    • 4 Tweeter trim rings (2 Polished aluminum/2 Brushed aluminum)
    • Two M4x25mm Machine screws
    • Two M4x10mm Machine screws
    • Two M4x15mm Stud bolts
    • Two 40″ Crossover input wires (female quick-slide connectors on one end and bare wire on the other)
    • Two 40″ Crossover output wires (female quick-slide connectors on one end and male quick-slide connectors on the other)
    • Four 7″ Zip-ties
    • Installation/Operation instructions (English/ French/ Spanish/ German/ Italian)
  • Rockford Fosgate T2T-S
    SKU: T2T-S
    • 2 Tweeters (with attached 6″ speaker wire terminated with female quick-slide connectors)
    • 2 Crossovers
    • 2 Front flush mount tweeter brackets
    • 2 Rear flush mount tweeter brackets
    • 2 Surface mount tweeter housings
    • 4 Tweeter trim rings (2 Polished aluminum/2 Brushed aluminum)
    • Two M4x25mm Machine screws
    • Two M4x10mm Machine screws
    • Two M4x15mm Stud bolts
    • Two 40″ Crossover input wires (female quick-slide connectors on one end and bare wire on the other)
    • Two 40″ Crossover output wires (female quick-slide connectors on one end and male quick-slide connectors on the other)
    • Four 7″ Zip-ties
    • Installation/Operation instructions (English/ French/ Spanish/ German/ Italian)
Menu
Give Us a Call
Murrieta (951) 304-7444 | Montclair (909) 482-0555