Amp Wiring Kits

• One 17′ Power cable (1/0-gauge) in a red translucent jacket
• 3′ Ground cable (1/0-gauge) in a translucent gray jacket (with a ring terminal on one end)
• 20′ Turn-on lead in a blue jacket
• ANL fuse holder (top cover and bottom plate)
• 300-amp ANL-fuse (installed in fuse holder)
• 2 Power rings
• Ten 4″ wire ties
• Plastic grommet
• 5 Plastic butt connectors
• 5 Female quick slide connectors
• 6 Male quick slide connectors
• 2 Black rubber boots
• Bolt with 2 nuts/2 lock-washers/3 star-washers installed

• 17′ Power cable (1/0-gauge) in a red translucent jacket (has an in-line MAXI fuse holder and a ring terminal on the battery end)
• 300A MAXI fuse (installed in fuse holder)
• 3′ Ground cable (1/0-gauge) in a gray translucent jacket (with a ring terminal on one end)
• 4′ Power cable (4-gauge) in a red translucent jacket
• 4′ Ground cable (4-gauge) in a gray translucent jacket
• 2 Distribution blocks (One 1/0-gauge in/two 4-gauge out)
• Three 16′ twisted pair RCA patch cords
• 30′ Length of 16-AWG speaker wire
• 20′ Length of turn-on lead in a blue jacket
• Ten 4″ wire ties
• Plastic bag containing the following:
• Crimp-on ring terminal for 1/0-gauge wire
• Large black rubber boot
• Plastic 1/0 gauge-sized grommet
• 2 Red plastic butt connectors
• Crimp-on female 0.25″ quick slide connector
• Crimp-on spade connector
• Red rubber boot
• GM battery post bolt with 2 nuts/2 lock-washers/3 star-washers installed
• 2 Rubber washers
• Decal with model and serial numbers

• One 17′ Power cable (4-gauge) in a red translucent jacket (has an in-line fuse holder and a ring terminal on the battery end)
• 3′ Ground cable (4-gauge) in a translucent gray jacket (with a ring terminal on one end)
• 20′ Turn-on lead in a blue jacket
• 100-amp Maxi-fuse
• Power Ring
• Ten 4″ wire ties
• Plastic grommet
• 2 Plastic butt connectors
• Female quick slide connector
• Male quick slide connector
• Small red rubber boot
• Large black rubber boot

• 17′ Power cable (4-gauge) in a red translucent jacket (has an in-line MAXI fuse holder and a ring terminal on the battery end)
• 3′ Ground cable (4-gauge) in a gray translucent jacket (with a ring terminal on one end)
• 6′ Power cable (8-gauge) in a red translucent jacket
• 6′ Ground cable (8-gauge) in a gray translucent jacket
• 2 Distribution blocks (One 4-gauge in/Three 8-gauge out)
• Two 16′ twisted pair RCA patch cords
• 30′ Length of 16-AWG speaker wire
• 20′ Length of turn-on lead in a blue jacket
• Ten 4″ wire ties
• Plastic bag containing the following:
• Crimp-on ring terminal for 4-gauge wire
• Large black rubber boot
• 100A MAXI fuse
• Plastic 4 gauge-sized grommet
• 2 Red plastic butt connectors
• 5 Crimp-on female 0.25″ quick slide connectors
• 5 Crimp-on spade connectors
• 3 Red rubber boots
• 2 Black rubber boots
• Decal with model and serial numbers

• One 17′ Power cable (4-gauge) in a red translucent jacket (has an in-line MAXI fuse holder and a ring terminal on the battery end)
• 100-amp MAXI fuse
• 3′ Ground cable (4-gauge) in a translucent gray jacket (with a ring terminal on one end)
• 16′ Twisted pair RCA patch cord
• 20′ Turn-on lead (18-gauge) in a blue jacket
• One 4-gauge crimp-on spade connector
• Black insulating boot
• One 18-gauge crimp-on spade connector
• Red insulating boot
• One crimp-on female 0.25″ quick slide connector
• Ten 3″ zip-ties
• 1 Plastic grommet
• 2 Plastic butt connectors
• Decal with model and serial numbers

• One 17′ Power cable (4-gauge) in a red translucent jacket (has an in-line MAXI fuse holder and a ring terminal on the battery end)
• 100A MAXI fuse
• 3′ Ground cable (4-gauge) in a translucent gray jacket (with a ring terminal on one end)
• 16′ Twisted pair RCA patch cord
• 30′ of 16-AWG speaker wire
• 20′ Turn-on lead in a blue jacket
• Ten 4″ wire ties
• 1 Plastic grommet
• 5 Plastic butt connectors
• 6 Female quick slide connectors
• 5 Male quick slide connectors
• Eight 16-AWG Spade connectors
• 4 Blue rubber boots
• 4 Black rubber boots

• One 17′ Power cable (8-gauge) in a red translucent jacket (has an in-line 60A fuse/fuse holder and a ring terminal on the battery end)
• 3′ Ground cable (8-gauge) in a translucent gray jacket (with a ring terminal on one end)
• 20′ Turn-on lead in a blue jacket
• Ten 4″ wire ties
• 1 Plastic grommet
• 3 Plastic butt connectors
• Female quick slide connector
• Male quick slide connector
• Ring terminal
• Small red rubber boot
• Large black rubber boot

• One 17′ Power cable (8-gauge) in a red translucent jacket (has an in-line 60A fuse/fuse holder and a ring terminal on the battery end)
• 3′ Ground cable (8-gauge) in a translucent gray jacket (with a ring terminal on one end)
• 16′ Twisted pair RCA patch cord
• 20′ Turn-on lead in a blue jacket
• Ten 4″ wire ties
• 1 Plastic grommet
• 5 Plastic butt connectors
• 6 Female quick slide connectors
• 5 Male quick slide connectors

Kit includes:

• 17 feet of 8 AWG power wire
• 3 foot of 8 AWG ground wire
• 30 feet of 16 AWG speaker wire
• (1) 16 feet twisted pair RCA
• AGU fuse holder and fuse
• 20 feet of remote wire
• 40 Amp fuse.