Rockford Fosgate

Image
SKU
Product
Rating
Price
  • iDatalink HRN-AR-FO3 Harness
    SKU: HRN-AR-FO3
    • 17″ Installation harness
    • 16″ Speaker harness
    • 2′ Harness (2-pin)
  • iDatalink HRN-DSP-CH3
    SKU: HRN-DSP-CH3
    • 40″ Main T-harness w/ inline fuse holder (installed 7.5A mini ATC fuse)
    • 57″ 2-Pin T-harness
  • iDatalink HRN-DSP-NI1
    SKU: HRN-DSP-NI1
    • 40″ Main T-harness w/ inline fuse holder (installed 7.5A mini ATC fuse)
    • Installation instructions
  • iDatalink HRN-DSP-TO1
    SKU: HRN-DSP-TO1
    • 40″ Main T-harness w/ inline fuse holder (installed 7.5A mini ATC fuse)
    • Installation instructions
  • Rockford Fosgate BDSYNC2
    SKU: BDSYNC2

    Bridging Cable for Power bd Amplifiers

    • Designed to strap a pair of Class-bd POWER series amplifiers together to make one large mono amplifier. Available on select models only.
  • Rockford Fosgate DSR1
    SKU: DSR1
    • Digital signal processor
    • 7″ microUSB-to-USB cable
    • 18-pin input harness
    • 16-pin output harness
    • Quick-start guide
  • Rockford Fosgate GNRL-REAR
    SKU: GNRL-REAR
    • Rockford Fosgate RM1652W-MB:
    • 2 Wakeboard tower speakers
    • 2 Mounting couplers
    • Two 16″ Speaker harnesses
    • 4 Plastic grommets
    • 4 Mounting bolts
    • 2 Security bolts (pre-installed)
    • 4 Nuts
    • 2 Safety lanyards
    • 2 Lanyard washers
    • Torx wrench
    • Installation & Operation Manual
    • Rockford Fosgate PM-CL3B:
    • 2 Mounting clamps
    • 2 Self-adhesive logos
    • 2 Rubber inserts
    • 4 Wire-ties
    • 2 Wire-clamps
    • Rockford Fosgate RFX3-RSW16:
    • 2 Rear speaker harnesses
    • 16 Wire-ties
    • Installation Instructions
  • Rockford Fosgate GNRL-STAGE1
    SKU: GNRL-STAGE1
    • Rockford Fosgate PMX-2:
    • Marine digital media receiver
    • Trim-ring
    • Mounting plate
    • Mounting bracket
    • Wiring harness
    • Backstrap
    • 4 Machine screws
    • 4 Hex-nuts
    • Installation & Operation booklet
    • Rockford Fosgate RFGNRL-PMXDK:
    • Dash bezel
    • PMX-2 harness
    • PMX-0 harness
    • Power harness
    • PMX-2 housing
    • PMX-0 housing
    • Metal bracket
    • 8 Small screws
    • 2 Large screws
    • 4 Butt-connectors
    • 5 Wire-ties
    • Installation/Operation Booklet
  • Rockford Fosgate GNRL-STAGE2
    SKU: GNRL-STAGE2
    • Rockford Fosgate PMX-2:
    • Marine digital media receiver
    • Trim-ring
    • Mounting plate
    • Mounting bracket
    • Wiring harness
    • Backstrap
    • 4 Machine screws
    • 4 Hex-nuts
    • Installation & Operation booklet
    • Rockford Fosgate RFGNRL-PMXDK:
    • Dash bezel
    • PMX-2 harness
    • PMX-0 harness
    • Power harness
    • PMX-2 housing
    • PMX-0 housing
    • Metal bracket
    • 8 Small screws
    • 2 Large screws
    • 4 Butt-connectors
    • 5 Wire-ties
    • Installation/Operation Booklet
    • Rockford Fosgate RFGNRL-FSE:
    • 2 Empty speaker pods
    • 2 Speaker harnesses
    • 2 Self-adhesive foam pads
    • 6 Screws
    • 6 Nuts
    • 12 Washers
    • 6 Wire-ties
    • Installation & Operation booklet
    • Rockford Fosgate RM1652B:
    • Two 2-way marine speakers (with fixed grilles)
    • Eight 1-1/4″ Stainless steel Allen head screws
    • 3mm Allen head bit
    • 8 Speed clips
    • Installation & Operation booklet
  • Rockford Fosgate GNRL-STAGE3
    SKU: GNRL-STAGE3
    • Rockford Fosgate PMX-2:
    • Marine digital media receiver
    • Trim-ring
    • Mounting plate
    • Mounting bracket
    • Wiring harness
    • Backstrap
    • 4 Machine screws
    • 4 Hex-nuts
    • Installation & Operation booklet
    • Rockford Fosgate RFGNRL-PMXDK:
    • Dash bezel
    • PMX-2 harness
    • PMX-0 harness
    • Power harness
    • PMX-2 housing
    • PMX-0 housing
    • Metal bracket
    • 8 Small screws
    • 2 Large screws
    • 4 Butt-connectors
    • 5 Wire-ties
    • Installation/Operation Booklet
    • Rockford Fosgate RFGNRL-FSE:
    • 2 Empty speaker pods
    • 2 Speaker harnesses
    • 2 Self-adhesive foam pads
    • 6 Screws
    • 6 Nuts
    • 12 Washers
    • 6 Wire-ties
    • Installation & Operation booklet
    • Rockford Fosgate RM1652B:
    • Two 2-way marine speakers (with fixed grilles)
    • Eight 1-1/4″ Stainless steel Allen head screws
    • 3mm Allen head bit
    • 8 Speed clips
    • Installation & Operation booklet
    • Rockford Fosgate RM110D2B:
    • 10″ Woofer
    • Grille
    • 8 Screws
    • Installation & Operation booklet
    • TM400X4AD:
    • 4-Channel moto-marine amplifier
    • Power/ground/turn-on plug (installed)
    • Two 8″ Speaker output harnesses (bare wire to 4-pin Molex)
    • Two 14″ Input harnesses (2 RCA to 4-pin Molex)
    • Setup Disc (CD)
    • Amplifier Quick Setup
    • Certificate of Performance Verification
    • booklet
    • Rockford Fosgate RFGNRL-FWE:
    • Empty subwoofer enclosure
    • Large bracket
    • Small bracket
    • 14″ Red wire lead
    • Wire-clamp
    • 4 Long bolts
    • 4 Short bolts
    • Nut
    • Installation & Operation booklet
    • Rockford Fosgate RFGNRL-K8:
    • Wiring harness (inline 60A Maxi-fuse)
    • 4 Screws
    • 6 Wire-ties
    • 4 Wire-clamps
    • Installation & Operation booklet
  • Rockford Fosgate GNRL-STAGE4
    SKU: GNRL-STAGE4
    • Rockford Fosgate PMX-2:
    • Marine digital media receiver
    • Trim-ring
    • Mounting plate
    • Mounting bracket
    • Wiring harness
    • Backstrap
    • 4 Machine screws
    • 4 Hex-nuts
    • Installation & Operation booklet
    • Rockford Fosgate RFGNRL-PMXDK:
    • Dash bezel
    • PMX-2 harness
    • PMX-0 harness
    • Power harness
    • PMX-2 housing
    • PMX-0 housing
    • Metal bracket
    • 8 Small screws
    • 2 Large screws
    • 4 Butt-connectors
    • 5 Wire-ties
    • Installation/Operation Booklet
    • Rockford Fosgate RFGNRL-FSE:
    • 2 Empty speaker pods
    • 2 Speaker harnesses
    • 2 Self-adhesive foam pads
    • 6 Screws
    • 6 Nuts
    • 12 Washers
    • 6 Wire-ties
    • Installation & Operation booklet
    • Rockford Fosgate RM1652B:
    • Two 2-way marine speakers (with fixed grilles)
    • Eight 1-1/4″ Stainless steel Allen head screws
    • 3mm Allen head bit
    • 8 Speed clips
    • Installation & Operation booklet
    • Rockford Fosgate RM110D2B:
    • 10″ Woofer
    • Grille
    • 8 Screws
    • Installation & Operation booklet
    • TM400X4AD:
    • 4-Channel moto-marine amplifier
    • Power/ground/turn-on plug (installed)
    • Two 8″ Speaker output harnesses (bare wire to 4-pin Molex)
    • Two 14″ Input harnesses (2 RCA to 4-pin Molex)
    • Setup Disc (CD)
    • Amplifier Quick Setup
    • Certificate of Performance Verification
    • booklet
    • Rockford Fosgate RFGNRL-FWE:
    • Empty subwoofer enclosure
    • Large bracket
    • Small bracket
    • 14″ Red wire lead
    • Wire-clamp
    • 4 Long bolts
    • 4 Short bolts
    • Nut
    • Installation & Operation booklet
    • Rockford Fosgate RFGNRL-K8:
    • Wiring harness (inline 60A Maxi-fuse)
    • 4 Screws
    • 6 Wire-ties
    • 4 Wire-clamps
    • Installation & Operation booklet
    • Rockford Fosgate RM1652W-MB:
    • 2 Wakeboard tower speakers
    • 2 Mounting couplers
    • Two 16″ Speaker harnesses
    • 4 Plastic grommets
    • 4 Mounting bolts
    • 2 Security bolts (pre-installed)
    • 4 Nuts
    • 2 Safety lanyards
    • 2 Lanyard washers
    • Torx wrench
    • Installation & Operation Manual
    • Rockford Fosgate PM-CL3B:
    • 2 Mounting clamps
    • 2 Self-adhesive logos
    • 2 Rubber inserts
    • 4 Wire-ties
    • 2 Wire-clamps
    • Rockford Fosgate RFX3-RSW16:
    • 2 Rear speaker harnesses
    • 16 Wire-ties
    • Installation Instructions
  • Rockford Fosgate HD14-SBSUB
    SKU: HD14-SBSUB
      • This Harley Davidson subwoofer package contains individual boxes for the Brake Side and Clutch Side installation parts:
    • Brake Side:
    • Subwoofer enclosure loaded with one M1D2-10B subwoofer
    • 4-Channel powersports amplifier w/installed direct-connect harnesses
    • Cutting & drilling template panel
    • Grille
    • Block-off panel
    • Trim ring w/3M adhesive backing
    • Wire pass-thru panel w/3M adhesive backing
    • 28″ Subwoofer wire harness w/3M adhesive backing
    • 3mm Allen key
    • 4 Plug covers w/3M adhesive backing
    • Amplifier instruction manual
    • Amplifier tuning guide
    • Saddlebag Notice
    • Clutch Side:
    • Subwoofer enclosure loaded with one M1D2-10B subwoofer
    • Cutting & drilling template panel
    • Grille
    • Block-off panel
    • Trim ring w/3M adhesive backing
    • Wire pass-thru panel w/3M adhesive backing
    • Amplifier mounting plate
    • Amplifier cover
    • 8′ Main wiring harness (inline 40A ATO fuse)
    • 28″ Subwoofer wire harness w/3M adhesive backing
    • Amplifier output Y-adapter harness
    • 45mm Hole saw bit
    • Four 1-1/4″ mounting bolts
    • 4 Mounting-bolt clips
    • Eight 3/4″ screws
    • Eight 12mm machine screws
    • Eight 6mm screws
    • Two 4mm machine screws
    • 4 Flat washers
    • 2 Nuts
    • 2 Wire plugs
    • 5mm Allen key
    • Twelve 7.5″ wire ties
    • HD14-SBSUB instruction manual
Menu
Give Us a Call
Murrieta (951) 304-7444 | Montclair (909) 482-0555