Heise

Black plated aluminum to be attractive and strong
Rubber gasket included to protect the roll bar
Use with Heise Light Bars – Driving – Work lights
Allen keys included
2-pack

IR remote
Connect up to three HE-5MRGB-1 lights to the controller
Sensitivity adjustment

Same switch as used in the Heise relay harnesses
20 amp
Rubber cover helps protect switch from dust and water intrusion
Red
5-pack

Specs
Input Voltage: 10-30V DC
Wattage: 72W (24-3W OSRAM LEDs)
Raw Lumens: 6480
Color Temperature: 6000K
Beam Pattern: combo/flood (90 degree) / spot (8 degree)
Construction
Housing Material: powder-coated aluminum
Housing Color: black
Membrane: Gore™
Lens Material: PC
Mounting Bracket: die-cast aluminum
Mounting: side and bottom
Hole Dimensions:
Brackets turned inward – 31.5″
Brackets turned outward – 33.25″
Mounting bolt drill – .25″
Electronics: integrated-epoxy encapsulated
Hardware: stainless 316
Operation
Operating Temperature: -40degC to +60degC
Current Consumption: 4 amps at 13.8 volts
IP Rating: IP67
Protections: reverse polarity

9 ft lead for lightbar connector(s)
Universal Wiring Harness and Switch Kit (for 1 Lamp – DT connector)
Universal plug-n-play wiring harness with on-off rocker switch
12V DC relay
30A fuse
Use with one Heise light – 150 watts or less

9 ft lead for light bar connector(s)
Universal wiring harness and switch kit (for 1 lamp, ATP connector)
Universal plug-n-play wiring harness with on/off rocker switch
12V DC relay
30A fuse
Use with 1 Heise light 160 watts or more

Specs
Input Voltage: 10-30V DC
Blue Color: (3-3W LEDs)
Wattage: 9W
Raw Lumens: 720
Beam Pattern: 120° Flood
Construction
Housing Material: Black Die-cast Aluminum Housing
Lens Material: PC
Mounting: Two Rubber Bases Included
Hardware: Black Screws
Operation
Operating Temperature: -40°C to +60°C
Current Consumption: .2 amps at 13.8 volts
IP Rating: IP68

These small but powerful auxiliary accent lighting pods are ideal for custom lighting in even the most rugged vehicles. Torture tested with a virtually unbreakable polycarbonate lens and IP68 rated. They can get hit, shaken, muddy or wet—without fear of failure. Whether you are fishing at night, cruising trails on your ATV or want more lighting in your truck, this 1.5×3 inch RGB LED Accent Light provides endless RGB color options.

10mm wide – 60 LEDs per meter
Water-resistant covering
3M double-sided tape provides a strong bond
120-degree viewing angle
LED strips can be cut at every 3rd LED
5 meter strip only draws 4.5 amps of current
Each 5050 LED housing is 5mm x 5mm and is a group of 3 tiny Ultra Bright LEDs
Bulk packaging

• Universal 1.5×3″ Blue LED Accent Light
• Water-resistant IPX-68 Rating
• 120° Flood Beam Pattern
• Includes cutout template, gasket, and hardware