Specs
Input Voltage: 10-30V DC
Blue Color: (3-3W LEDs)
Wattage: 9W
Raw Lumens: 720
Beam Pattern: 120° Flood
Construction
Housing Material: Black Die-cast Aluminum Housing
Lens Material: PC
Mounting: Two Rubber Bases Included
Hardware: Black Screws
Operation
Operating Temperature: -40°C to +60°C
Current Consumption: .2 amps at 13.8 volts
IP Rating: IP68
Specs
Input Voltage: 10-30V DC
Blue Color: (3-3W LEDs)
Wattage: 9W
Raw Lumens: 720
Beam Pattern: 120° Flood
Construction
Housing Material: Black Die-cast Aluminum Housing
Lens Material: PC
Mounting: Two Rubber Bases Included
Hardware: Black Screws
Operation
Operating Temperature: -40°C to +60°C
Current Consumption: .2 amps at 13.8 volts
IP Rating: IP68
Taking everything we’ve learned in LED lighting technology and putting it to good use, we offer our highest output kit ever. Physically smaller than the L4 series, we give you 25% more light output than L4 with less than 10% more current draw. There are situations where you may not want the look, installation hassle or modifications needed to install a traditional light bar. Now you have a real alternative that offers the output of light bars often costing twice as much. Offered in high beam styles or dual beam with staggered output. Simple plug and play installation.
Lucas Lighting L3-9004 L3 Series 9004 Replacement LED Headlight Bulbs
The gold standard. If you’re looking for the brightest aftermarket LED halogen replacement, you have found it with our L3 series. The L3 series can produce 7x the light output of stock halogen bulbs. When properly installed and aimed, you will have more forward light output than you ever imagined possible, without overpowering oncoming vehicles. Our superior designs produces a consistent, sweeping pattern of light with a sharp and large focus point. Those that demand the best choose Lucas Lighting L3 series.
LED automotive replacement front-firing bulbs are intended for off-road and fog light applications.
Features
16,000 lumens per pair (sold in pairs)
Compatible with BOTH standard reflector AND projector style housings
Upgraded CANBUS chipset
IP67 rated moisture resistance
3X more electrically efficient than halogen bulb technology
Instant On
LED automotive replacement front-firing bulbs are intended for off-road and fog light applications.
Product info:
set of two L-Series Intelligent Decoders
for use with H8, H9, H11, and H16 style LED bulbs
corrects LED headlight issues such as error codes, warning messages, flashing, and poor radio reception in select vehicles
plug-and-play installation
power rating: 6.5-13.5 watts
voltage range: 9-16 volts
some specific applications will also require a resistor.
use the Lucas Lighting fit guide linked on this page to determine what works in your vehicle
warranty: 1 year
Product info:
set of two white LED 9007 style headlight bulbs
brightness: approximately 16,000 lumens (per pair of bulbs)
IP67 rated (water- and dust-resistant)
seven times as bright as comparable halogen bulbs
dual output
large focus point
fanless design
compatible with most vehicle CAN-bus systems
can replace HB5 style bulbs
use the Lucas Lighting fit guide linked on this page to determine what works in your vehicle
aftermarket LED headlight replacement bulbs are not DOT-certified
warranty: 1 year
Leave a Reply