SPECS: Input Voltage- 10-30V DC, Wattage- 9W (3-3W CREE LEDs), Raw Lumens- 1200/720, Beam Pattern- 120 degrees Flood. CONSTRUCTION: Housing Material- White Die-cast Aluminum Housing, Lens Material- PC, Mounting- Cutout Template and Gasket Included, Hardware- Stainless 316. OPERATION: Operating Temperature- (-40) degrees C to (+60) degrees C, Current Consumption- .2 amps at 13.8 volts, IP Rating- IP68.
SPECS: Input Voltage- 10-30V DC, Wattage- 9W (3-3W CREE LEDs), Raw Lumens- 1200/720, Beam Pattern- 120 degrees Flood. CONSTRUCTION: Housing Material- White Die-cast Aluminum Housing, Lens Material- PC, Mounting- Cutout Template and Gasket Included, Hardware- Stainless 316. OPERATION: Operating Temperature- (-40) degrees C to (+60) degrees C, Current Consumption- .2 amps at 13.8 volts, IP Rating- IP68.
Taking everything we’ve learned in LED lighting technology and putting it to good use, we offer our highest output kit ever. Physically smaller than the L4 series, we give you 25% more light output than L4 with less than 10% more current draw. There are situations where you may not want the look, installation hassle or modifications needed to install a traditional light bar. Now you have a real alternative that offers the output of light bars often costing twice as much. Offered in high beam styles or dual beam with staggered output. Simple plug and play installation.
Features:
Replaces H8, H9, H11ST/SU/XV, H16 (L shaped)
IP67 rated or better
13,000 lumens per pair (sold in pairs)
Compatible with BOTH standard reflector AND projector style housings
High-quality chipset
10,000-hour life span or better
Plug and play direct replacement
3X more electrically efficient
Instant on
5X light output compared to halogen bulbs
1-Year limited warranty against manufacturing defects when consumer installed
3-year limited warranty against manufacturing defects when professionally installed by a Lucas Lighting Retailer
LED automotive replacement front-firing bulbs are intended for off-road and fog light applications
UPC: 850031428324
Weight: 2
The L1 headlight series is designed & engineered to compete with lower-cost bulbs on the market, but offer the same superior light pattern, installation ease and reliability of our more expensive products. L1 bulbs are overachievers, and bring a class-leading level of performance to this range. Offered in all popular sizes.
10,000 lumens output per pair (sold in pairs)
Large and correct focus point
Compatible with BOTH standard reflector AND projector style housings
IP65 rated or better
Easy installation
High-quality overbuilt chipset
3X brighter than halogen bulbs
10,000-hour life-span normal use
Bright white color
2025 Production H11 and 9005/6 support 6 volt daytime running lights circuits (non-PWM) with 20% of full output in 6 volt mode
2025 Production H11 and 9005/6 can be damaged when connected with incorrect polarity, test factory harness prior to connection
1-Year limited warranty against manufacturing defects when consumer installed
3-year limited warranty against manufacturing defects when professionally installed by a Lucas Lighting retailer (non-commercial)
LED automotive replacement front-firing bulbs are intended for off-road and fog light applications.
Our Lucas Lighting L1 Series headlight bulbs are designed with direct fit plug and play connectors that require no wiring. These will simply plug-in to your factory connector and replace your factory bulbs with little or no modifications required. Some applications will require additional parts for proper installation.
Product info:
set of two white LED 9007 style headlight bulbs
brightness: approximately 16,000 lumens (per pair of bulbs)
IP67 rated (water- and dust-resistant)
seven times as bright as comparable halogen bulbs
dual output
large focus point
fanless design
compatible with most vehicle CAN-bus systems
can replace HB5 style bulbs
use the Lucas Lighting fit guide linked on this page to determine what works in your vehicle
aftermarket LED headlight replacement bulbs are not DOT-certified
warranty: 1 year
Leave a Reply