USS4
UNIVERSAL SPEAKERS SIMULATOR
Some OEM sources/head-units have a test circuit that monitors the presence of a low-impedance load to enable audio outputs. When you connect this type of head-unit to the high-level inputs of an Audison bit processor, which has a high impedance load, audio outputs are silenced. By inserting the USS 4 between the source and the processor / amplifier, these problems are definitively solved. If there is a need to generate a remote signal to control the amplifier turn on/off, it is necessary to power* the USS4, providing the additional feature of the possibility to delay the signal from 1 to 8 seconds, so as to avoid annoying “bumps” upon ignition.
* In countries where the legislation on electromagnetic compatibility is not mandatory under ECE / UN Regulation no. 10/5
Related products
-
6.5 Inch Midrange 2 OHM SINGLE Speaker No Retail Package
-
THG 1.5 II
THG 1.5 II optional mesh grilles dedicated to TH 1.5 Violino can be defined with only one word: unique. They are made with finest steel without any compromise, to overcome the absolute.Comp Tweeter
Size 38 mm (1.5″)
Power Handling 200 (Hi-Pass filtered @ 1,8kHz – 12 dB Oct.) W peak
Impedance 6 Ohm
Frequency Response 800 ÷ 26k Hz
Sensitivity 93 dB/Spl
Magnet N38 “H-grade” Neodymium
Dome Tetolon fibre
-
THG 1.5 II optional mesh grilles dedicated to TH 1.5 Violino can be defined with only one word: unique. They are made with finest steel without any compromise, to overcome the absolute.
Leave a Reply